🚀 go-pugleaf

I think i got a bit closer to the problem ....
When i install the "Standard PCI-Graphiccard (VGA)" drivers for my
"Pixelview TNT2 Model 64 with TV-out (PCI)",
then the pci512 card works very well ... but then i have a problem with my
tnt2 card because the standard drivers
don't support more that 640*480 and 16 colors, and there's no 3d
accelerating or nothing .... BUT windows
dosn't crash ....

Is it a known problem with tnt2 PCI and pci512 in the same pc ??
Is there any special tnt2 drivers i should try ? (They need to support
tv-out also)


Allan M. Christensen <allanmc@pc.dk> skrev i en
nyhedsmeddelelse:92vut9$sfh$1@news.creativelabs.com...
> The PCI512 card is in the topmost PCI slot ....
> And yes i have set it back to Auto, after all my tryes in the bios
>
> Ossama M. Elkadi <oelkadi2000NOSPAM@yahoo.de> skrev i en
> nyhedsmeddelelse:92vtp2$rfk$1@news.creativelabs.com...
> > What happens if you physically move the PCI 512 card to the topmost PCI
> > slot? Does this change anything in IRQ assignment?
> > If that does not help, did you make sure to enable automatic IRQ
> assignment
> > in your PC's BIOS setup (see your motherboard or PC brand manual for
info
> on
> > how to enter BIOS setup; usually you press <Del>, <F10> or <F1> to enter
> > BIOS setup during booting)?
> >
> > HTH,
> > --
> > Ossama Elkadi
> > Technical Assistant
> > BMW-ACVA CKD Plant
> > (Please do not send any e-mails to me
> > unless explicitly asked to do so.
> > When sending e-mails, please remove the
> > NOSPAM from my address)
> >
> > =============================================
> > "Allan M. Christensen" <allanmc@pc.dk> wrote in message
> > news:92tnf3$9kn$1@news.creativelabs.com...
> > > That didn't change anything :(
> > > Still the same ......
> > >
> >
> >
> >
>
>