🚀 go-pugleaf

Just for grins I selected every blasted controller listed as well as trying
each with and without the rudder pedals selected.  After an hour of enjoying
that mindless task, still no luck.


Nogib <no-spam-please@email.com> wrote in message
news:39F63FD0.7C202DCC@email.com...
> The one dot setting is NOT digital mode on this stick!  The one dot / two
dot
> setting is simply for old analog Thrustmaster FCS or CH Flightstick Pro
modes.
> When using the MS Sidewinder software and drivers then it is in digital
mode.
> No user settings are needed.  But everybody (including myself) has run
across
> this now infamous " Not Detected" problem and Microsoft is no help at all!
The
> ONLY reliable way to get the old 3D Pro to work nowdays is to tell Windows
that
> you have a generic 4-button stick with throttle and run it in analog mode.
The
> allegedly "fixed" drivers for it they released almost two years ago did
nothing
> for it.  Obviously Microsoft gave up on it and couldn't get the digital
mode to
> work on current systems anymore.  They COULD completely re-write the
driver for
> it, but for a well outdated stick, they clearly don't feel the need to do
so
> (lazy bastards!).
>
> -Nogib
>
> GP wrote:
>
> > Probably you need the latest software updates from Microsoft to get
> > Sidewinder 3D Pro connect. At least in Windows98 - Windows98SE.
> > Install the latest gaming software updates and you should regain
Sidewinder
> > 3D Pro connected in digital mode like it should.
> >
> > You need to install the following two updates from Microsoft hardware
> > downloads page:
> > Game Controller Software Version 3.02    THEN    Sidewinder 3D Pro
Patch.
> > Also make sure the switch under base is set to the one-dot (digital
mode)
> > position.
> >
> > You will find everything you need plus detailed instructions there:
> >
http://www.microsoft.com/products/hardware/sidewinder/downloads/default.htm
> >
> > Have fun ... finally
> > Let us know how it went !
> > GP
>
> --------------------------------------------------------------------------
--
> > ----
> > "Kurt Mayer (Intuitive Technology)" <kmayer@aglance.com> wrote in
message
> > news:8t4dtr$gkn$1@news.creativelabs.com...
> > >
> > <CUT>
> > > also installed the Soundblaster Live! Value card.  The operating
system is
> > > WindowsME and I've verified that all drivers are current for all the
> > devices
> > > installed.
> > >
> > > This all works fine together until I try to use my MS Sidewinder 3d
Pro
> > > joystick.  It shows up as "Not Connected" in the
> > ControlPanel.GamingOptions
> > > tool.
> > >
> > <CUT>
> > >
> > > Kurt
>