🚀 go-pugleaf

Wes,
Are you using all three of the burning titles all loaded at the same time?
Meaning all three are installed on your computer now?  If so that's
potentially the problem.
Most burner applications will not work properly if you have more than One
installed at the same time. And causes read and write conflicts. If you
reformat, you should chose only one and see the problem disappear.
"Wes" <Finallevel@ccountry.net> wrote in message
news:9krkoc$mtm$1@news.creativelabs.com...
>    I am having an intermittent problem reading 80 min CD's  they are
memorex
> .
>   I know it  Supports them and I don't think the drive is defective  I
> beleave it is  some kind of BIOS setting  or bad Firmware
>     I am using a 8438E CDRW  on the 2nd IDE cable as the master  and a 2nd
> CD Rom as a slave  I tried swapping the  the drives, now all I have
> connected   is the CDRW  It Still will not read the CD'S( 80 min) all the
> time . It only reads them 1 out id 15 times.
>  I have a 800 MHZ PIII
>             256MB SDRAM
>             Vodoo3 card
>             A-trend Motherboard ( ACT 7040 )
>             Win ME
>              EZcd Creator 5.02
>              NERO 5.0
>              NTI CD maker 2000 Plus 4.2.65
>  I also  format my drive and reinstalled  still no luck !!
>  If anyone has any sugestions please let me know
>
>
>