🚀 go-pugleaf

The following is the log file for Nero and the error that occurred. I
went to the Nero Online Helpdesk thingy but this error was never
listed. The CD-RW I going to burn it on to was a Pacific Digital that
I'd used before and reformatted.

the like about
"Read Write Control Task Error" is the problem, anyone have any ideas?

Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes,
created 4/23/99 10:22:00 PM
Nero Version: 4.0.7.0
Recorder:             <CREATIVE CD-RW RW6424E>  Version: 1.41 - HA 0
TA 1 - 4.0.7.0
 Adapter driver:      <ESDI_506
>               HA 0
CD-ROM:               <ATAPI    CD-ROM DRIVE-32X>Version: 323P - HA 0
TA 0
 Adapter driver:      <ESDI_506
>               HA 0
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 14680064 Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
RW-Sync        : 0->0
BUFE           : 0
Physical memory     : 63MB (64992kB)
Free physical memory: 0MB (4kB)
Memory in use       : 87 %
Uncached PFiles: 0x1F
Wizard: Off

CD-ROM (ISO)
9.1.2000

3:12:23 PM	#1 ISO9660GEN -11 File Geniso.cpp, Line 3245
	First writeable address = 0 (0x00000000)
	
3:12:23 PM	#2 ISO9660GEN -12 File Geniso.cpp, Line 3251
	Data Mode: 2, Write Mode: TAO
	
3:12:23 PM	#3 ISO9660GEN -11 File Geniso.cpp, Line 3245
	First writeable address = 0 (0x00000000)
	
3:12:23 PM	#4 ISO9660GEN -12 File Geniso.cpp, Line 3251
	Data Mode: 2, Write Mode: TAO
	
3:12:23 PM	#5 ISO9660GEN -11 File Geniso.cpp, Line 3245
	First writeable address = 0 (0x00000000)
	
3:12:23 PM	#6 ISO9660GEN -12 File Geniso.cpp, Line 3251
	Data Mode: 2, Write Mode: TAO
	
3:12:24 PM	#7 Phase 24 File dlgbrnst.cpp, Line 897
	Start of caching files
	
3:12:24 PM	#8 Phase 25 File dlgbrnst.cpp, Line 897
	Caching files completed
	
3:12:24 PM	#9 Phase 28 File dlgbrnst.cpp, Line 897
	Start of speed measurement
	
3:14:08 PM	#10 Phase 29 File dlgbrnst.cpp, Line 897
	Speed measurement done: 32x (4800 KB/s)
	
3:14:08 PM	#11 Phase 32 File dlgbrnst.cpp, Line 897
	Start of simulation at 4x (600 KB/s)
	
3:14:10 PM	#12 SCSI -1173 File Cmdqueue.cpp, Line 783
	SCSI Exec, HA 0, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x90
	Sense Qual: 0x82
	CDB Data:   0xAA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1E
0x00 0x00 
	
3:14:11 PM	#13 CDR -1175 File Cdrdrv.cpp, Line 2522
	Internal trace
	AllocBuf: Timeout for buffer allocation reached (>= 500ms)
	SCSI Buffer: 6144 of 14680064 bytes free (low 0, high 6144) 
	
3:14:11 PM	#14 mmc 36994 File Isotrf.cpp, Line 1116
	Read Write Control Task Error
	
3:14:11 PM	#15 TRANSFER -20 File Isotrf.cpp, Line 1126
	Could not perform Write
	
3:14:11 PM	#16 Phase 34 File dlgbrnst.cpp, Line 897
	Simulation failed at 4x (600 KB/s)
	

Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created
4/23/99 10:22:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 2, size=29771 bytes,
created 11/6/99 1:26:50 PM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created
4/23/99 10:22:00 PM