🚀 go-pugleaf

Michael Scadden wrote:
> 
> Disclaimer:  If the solution to this problem is in some form of documentation
> that I haven't read, don't flame much.  I've gone through piles of "stuff" to
>  figure this out....to no avail.
> 
> I've got a Packard Bell with a pentium 83 Mhz overdrive.
> 
> Whenever I fire up the Dialup that comes with Win95, it goes just fine and I
> connect with PPP.  But if I try to print from any program (internet related
> or not) I get the message "This program has performed an illegal operation
> and will be shut down.  If the problem persists...." and in the details block
> I get "MPREXE caused an invalid page fault in module MSNP32.DLL at...."  then
> some register and byte codes and a stack dump.  Shortly therafter, the
> operating system starts "falling apart"  (explorer crashes, button bar fails,
> time stops updating, etc.) at which point I have to reboot to print
> (Panasonic KX-P2123).
> 
>         I've had this problem before I upgraded the processor, so its not the
> overdrive processor.
> 
> Since many readers in this group go through the same dialup procedure, maybe
> someone else is having the same problem?  Anyone figure it out?  At least
> some dialog wouldn't hurt.
> 
> Michael Scadden
> lumbrjck@holly.colostate.eduThis happened to me using MSN This is what MSN told me to do and it 
worked.  Open the system properties dialog and go to the device manager 
tab and remove thd dial up adapter (have your Win95 CD or Disks 
handy)apply and ok through everything(I believe the system will 
restart). Now go to Start, Programs, Accessories, Internet Tools, 
Internet Setup Wizard, and follow the instructions on the screen.  This 
will reinstall the Dial up Adapter and everything should now work.  Good 
Luck!