🚀 go-pugleaf

I am a sysadmin without documentation, help!

I have a Seagate 2 GB disk I want to add onto a DEC 5000/240
workstation running Ultrix 4.4 for extra swap and tmp space.
Previously, this disk was running just fine off of another
workstation.  It was divided into a number of small partitions (d, e,
f) and I wanted to combine it into one large partition.  So I used
chpt to change the partition sizes on the disk, which are now:

%chpt -q /dev/rrz2c
/dev/rrz2c
Current partition table:
partition     bottom        top       size    overlap
    a              0      32767      32768    c,d,e,f,h
    b          32768     163839     131072    c
    c              0    4178873    4178874    a,b,d,e,f,g,h
    d              0          0          0    a,c,e,f,h
    e              0          0          0    a,c,d,f,h
    f              0          0          0    a,c,d,e,h
    g         163840    4178873    4015034    c
    h              0          0          0    a,c,d,e,f


Then I did a newfs on each partition, and there are no
unusual errors, just your typical warnings about unallocated
sectors.  

I can mount this disk just fine, but if I try to use "swapon /dev/rz2b",
I get "/dev/rz2b: No such device".  If I run a "file /dev/* | grep
rz", I get the following regarding this disk:

/dev/rrz2a:     character special (56/16) SCSI #0 RZxx disk #2 errors = 0/6 
/dev/rrz2b:     character special (56/17) SCSI #0 RZxx disk #2 errors = 0/6 
/dev/rrz2c:     character special (56/18) SCSI #0 RZxx disk #2 errors = 0/6 
/dev/rrz2d:     character special (56/19) SCSI #0 RZxx disk #2 errors = 0/6 
/dev/rrz2e:     character special (56/20) SCSI #0 RZxx disk #2 errors = 0/6 
/dev/rrz2f:     character special (56/21) SCSI #0 RZxx disk #2 errors = 0/6 
/dev/rrz2g:     character special (56/22) SCSI #0 RZxx disk #2 errors = 0/6 
/dev/rrz2h:     character special (56/23) SCSI #0 RZxx disk #2 errors = 0/6 

I'm not really sure what I've done wrong, but obviously something.  Any
help is appreciated, thank you!!

						--liz

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Liz Stewart				E-mail: liz@ece.neu.edu
Systems Administrator, VLSI Labs	Phone:  617-373-2159
Northeastern University (242 Dana)	Fax:    617-373-8970