🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: cu.slug
Article #488

Re: Sickly 3670

#488
From: Jeff Barnett
Date: Thu, 31 Oct 1996 00:00
17 lines
1239 bytes


>I've replaced the CPU (datapath, memory control, sequencer) with known
>good cards (they work in a 3640).  I haven't replaced the FEP or IO
>cards (I'm not sure they're compatible with a 3640?)

Ithink that all cards are tradable between a 40 and 70.  However, there
is a swappable prom on either the FEP, paddle, or IO card that describes
the hardware (maybe including the disks).  I think that you must swap
that chip if yoy swap the boards even between the same model machines.

I'm posting this to slug so that, if I'm out of my mind, a more
knowledgable sluger can correct what I`ve said.  If I'm on the
right track, maybe someone will tell you where the prom is.

Jeff Barnett
Technical Details
Message-ID: <846784921.25617@news.Colorado.EDU>
Path: arc1-ca.pugleaf.net!unknown!not-for-mail

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 10077e,2a9cc3750da2c7b5
X-Google-Attributes: gid10077e,public
From: Jeff Barnett <jbarnett@charming.nrtc.northrop.com>
Subject: Re: Sickly 3670
Date: 1996/10/31
Message-ID: <846784921.25617@news.Colorado.EDU>
X-Deja-AN: 193597465
distribution: cu
sender: daemon@lace.colorado.edu
x-note1: message-id generated by recnews
x-note2: mail msgid was   <9610311727.AA10169@charming.nrtc.northrop.com>
organization: University of Colorado at Boulder
newsgroups: cu.slug