🚀 go-pugleaf

We are pleased to announce the pilot test of a new print server for
students. In an attempt to increase reliability we are moving to the
commercial version of cups called ESP Print Pro (www.easysw.com).
Setup for the new server will be very similar to the old server, but
will unfortunately requires everyone to reinstall the printer(s). Use of
the Adobe postscript drivers  on windows machines will be mandatory for
this new server. Official instructions should be posted on help.cwru.edu
soon. If you decided to use the pilot server, the help desk will NOT be
able to help you with any problems you have. They will simply direct you
to printing-problems@technicalsupport.cwru.edu.

Please let others know about this pilot. We encourage everone to try it
and give us feedback on how it works. If this pilot goes well, we will
remove the old server and replace it with this new one at the start of
the school year.

WINDOWS
1) Everyone must "register". This only needs to be done once. To
register go to http://printing2.cwru.edu/register and enter your Network
ID.  You should receive a confirmation email soon after submitting the
form.
2) Download the Adobe Postscript drivers available from
http://www.adobe.com. When the official instructions are posted, a local
copy will be available.
3) Install the Adobe drivers and select a network printer with one of
the following URLs (note the s on https):
https://printing2.cwru.edu/classes/wade
https://printing2.cwru.edu/classes/fribley
4) You will be prompted for a username and password. Assuming you have
registered you can use your CWRU Network ID and password.
5) Wait for the installer to finish.

MACINTOSH OS 10.2 and higher
1) Everyone must "register". This only needs to be done once. To
register go to http://printing2.cwru.edu/register and enter your Network
ID.  You should receive a confirmation email soon after submitting the
form.
2) Open the Print Center.
3) Hold down the option key when clicking on "Add".
4) Select Advanced for the first pulldown box.
5) Select "Iinternet Printing Protocol using ipp" for the device.
6) Device Name can be whatever you want.
7) Device URI should be either:
a. ipp://<NetworkID>:<NetworkPassword>@printing2.cwru.edu/classes/wade
b.
ipp://<NetworkID>:<NetworkPassword>@printing2.cwru.edu/classes/fribley
8) Be sure you replaced <NetworkID> and  <NetworkPassword> with your
network ID and password.
9) Printer Model should remain Generic.
10) Click add.