Asuscom ISDNLink - E001B - Thread - go-pugleaf | RockSolid RetroBBS NetNews Server

Thread View: de.alt.comm.isdn4linux

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Eddie Mon, 20 Mar 2000 00:00

Asuscom ISDNLink - E001B

#20

Author: Eddie
Date: Mon, 20 Mar 2000 00:00

86 lines
4756 bytes

I've recently purchased an Asuscom ISDNLink 128K Adapter, and although
it works fine in Windows 98, I appear to be having some difficulty
getting it working in Linux (RedHat 6.0, 2.2.13).

I've downloaded and compiled the version 3.1beta7 of isdn4k-utils, and
have set up some scripts as described on Oakhaven Consultants web page,
at http://www.thennion.demon.co.uk/ISDN.html, and am using the driver
modules that came on the CD with the card.

I'm performing the following commands to try to start the link:

insmod -f isdn
insmod -f hisax id=ISDNLink type=35 protocol=2
isdnup
isdnctrl dial ippp0

When I run isdnup, it reports the following:

addif: No such device
Security for ippp0 is on
Hangup-Timeout for ippp0 is 180 sec.
Layer-2-Protocol for ippp0 is hdlc
Layer-3-Protocol for ippp0 is trans
Encapsulation for ippp0 is syncppp
ippp0 bound to 0
HiSax: No such device
SIOCADDRT: File exists

Somewhere in that may be a clue as to what's causing the problem, but
I'm afraid I'm too much of a novice with this to be sure.
The end result is that when I run isdnctrl, I get an E001B error,
followed by a local hangup.

Can anybody give me any hints as to what I should try next? (The full
log file follows, if it's any help)

Mar 20 07:35:02 deguello kernel: ISDN subsystem Rev:
1.86/1.74/1.90/1.53/1.17/1.2 loaded 
Mar 20 07:35:11 deguello kernel: HiSax: Linux Driver for passive ISDN
cards 
Mar 20 07:35:11 deguello kernel: HiSax: Version 3.3a (module) 
Mar 20 07:35:11 deguello kernel: HiSax: Layer1 Revision 2.36 
Mar 20 07:35:11 deguello kernel: HiSax: Layer2 Revision 2.20 
Mar 20 07:35:11 deguello kernel: HiSax: TeiMgr Revision 2.13 
Mar 20 07:35:11 deguello kernel: HiSax: Layer3 Revision 2.10 
Mar 20 07:35:11 deguello kernel: HiSax: LinkLayer Revision 2.35 
Mar 20 07:35:11 deguello kernel: HiSax: Approval certification valid 
Mar 20 07:35:11 deguello kernel: HiSax: Approved with ELSA Quickstep
series cards 
Mar 20 07:35:11 deguello kernel: HiSax: Approval registration numbers: 
Mar 20 07:35:11 deguello kernel: HiSax: German D133361J CETECOM ICT
Services GmbH 
Mar 20 07:35:11 deguello kernel: HiSax: EU (D133362J) CETECOM ICT
Services GmbH 
Mar 20 07:35:11 deguello kernel: HiSax: Approved with Eicon Technology
Diva 2.01 PCI cards 
Mar 20 07:35:11 deguello kernel: HiSax: Card 1 Protocol EDSS1
Id=ISDNLink (0) 
Mar 20 07:35:11 deguello kernel: HiSax: HFC-PCI driver Rev. 1.20 
Mar 20 07:35:11 deguello kernel: HiSax: HFC-PCI card manufacturer:
Asuscom/Askey card name: 675 
Mar 20 07:35:11 deguello kernel: HFC-PCI: defined at mem 0xc8128000 fifo
0xc0b88000(0xb88000) IRQ 10 HZ 100 
Mar 20 07:35:11 deguello kernel: HFC_PCI: resetting card 
Mar 20 07:35:11 deguello kernel: HFC 2BDS0 PCI: IRQ 10 count 0 
Mar 20 07:35:11 deguello kernel: HFC 2BDS0 PCI: IRQ 10 count 2 
Mar 20 07:35:11 deguello kernel: HiSax: DSS1 Rev. 2.19 
Mar 20 07:35:11 deguello kernel: HiSax: 2 channels added 
Mar 20 07:35:11 deguello kernel: HiSax: MAX_WAITING_CALLS added 
Mar 20 07:35:29 deguello ipppd: info: no PAP secret entry for this user! 
Mar 20 07:35:29 deguello ipppd[3620]: Found 1 device: /dev/ippp0
Mar 20 07:35:29 deguello ipppd[3621]: ipppd i2.2.10 (isdn4linux version
of pppd by MH) started
Mar 20 07:35:29 deguello ipppd[3621]: init_unit: 0 
Mar 20 07:35:29 deguello ipppd[3621]: Connect[0]: /dev/ippp0, fd: 8
Mar 20 07:36:01 deguello kernel: ippp0: dialing 1 08450798667... 
Mar 20 07:36:08 deguello kernel: isdn: ISDNLink,ch0 cause: E001B 
Mar 20 07:36:09 deguello kernel: isdn_net: local hangup ippp0 
Mar 20 07:36:09 deguello kernel: ippp0: Chargesum is 0 
Mar 20 07:36:19 deguello kernel: ippp0: dialing 1 08450798667... 
Mar 20 07:36:26 deguello kernel: isdn: ISDNLink,ch0 cause: E001B 
Mar 20 07:36:27 deguello kernel: isdn_net: local hangup ippp0 
Mar 20 07:36:27 deguello kernel: ippp0: Chargesum is 0

-- 
Eddie                                 mailto:eddie@deguello.demon.co.uk

Re: Asuscom ISDNLink - E001B

#21

Author: SteveL
Date: Mon, 20 Mar 2000 00:00

26 lines
2092 bytes

On Mon, 20 Mar 2000 20:11:07 +0000, Eddie <eddie@deguello.demon.co.uk>
wrote:

>I've recently purchased an Asuscom ISDNLink 128K Adapter, and although
>it works fine in Windows 98, I appear to be having some difficulty
>getting it working in Linux (RedHat 6.0, 2.2.13).
>
>I've downloaded and compiled the version 3.1beta7 of isdn4k-utils, and
>have set up some scripts as described on Oakhaven Consultants web page,
>at http://www.thennion.demon.co.uk/ISDN.html, and am using the driver
>modules that came on the CD with the card.
>

I suggest you first get the latest drivers from ftp.suse.com, and
compile these as kernel modules. Don't rely on the drivers that came
with the card. Look for the file isdn.tar.gz in the isdn4k-utils
directory.

Un-tar it . cd to isdn and run std2kern. This will copy the drivers
over the ones in the /usr/src/linux/drivers/isdn. Redo your make
modules and make modules_install. All this assumes you have the kernel
sources present, mind.... But since you're on 2.2.13 instead of the
Redhat 6.0 supplied 2.2.5, then I guess you have...

If that doesn't help, I'll grab my scripts and post 'em here next time
I go into Linux.

Re: Asuscom ISDNLink - E001B

#22

Author: Eddie
Date: Tue, 21 Mar 2000 00:00

22 lines
1578 bytes

SteveL wrote:
> 
> < snip > 
> If that doesn't help, I'll grab my scripts and post 'em here next
> time I go into Linux.

Ta for offering, but I don't think that'll be necessary as I seem to
have got it working now, after some advice from someone on the
isdn4linux mailing list.

The main problem was that I was assigning an id to the hisax module,
then not using this id in my scripts.

The other (easier to spot) problem was that my pap-secrets was set up
just for ppp0.

Thanks for the tips, anyway.

-- 
Eddie                                 mailto:eddie@deguello.demon.co.uk
VFR800                                                     ICQ#37423335
                       "Whale Oil Beef Hooked"

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads