ISDN RAS dial in connection through Firewall?

Thread View: de.comm.isdn.computer

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Daniel Domain Wed, 15 Sep 1999 00:00

#813

Author: Daniel Domain
Date: Wed, 15 Sep 1999 00:00

23 lines
2260 bytes

Hi there,
            Can someone please help me? I having a NT 4 server and a Novell
4.11 Server, workstations running Intranetware Client. Protocol: TCP/IP and
IPX/SPX. I need to install a ISDN card (internal) on the NT server to allow
personnel with ISDN connection at home to dial in, so that they can work
from home.

Questions are:
                1.    Is it possible to install a internal ISDN modem?
                2.    Can I assign a IP to the internal card?
                3.    I will be install a firewall product (eg. Checkpoint)
in the future,
                       can the remote user walk through the firewall and
connect to the lan.
                       Because from what I heard firewall product like
Checkpoint runs
                       only TCP/IP. So how to configure?
                4.    Where will be the authentication be?

            Can the above be configure?


Daniel

Re: ISDN RAS dial in connection through Firewall?

#814

Author: Gerd Ziran
Date: Thu, 16 Sep 1999 00:00

49 lines
2874 bytes

Daniel,

partial answers:

1. You'll need NT NDIS WAN drivers for your ISDN card, but then you
can use it for all RAS activities just like an analog modem.  I have a
NT4 Server machine with an active AVM B1 card running this way.

2. Don't think so, at least I cannot assign one to my card.  Although
the card, with NDIS drivers installed, will show up in the adapter
list, but it cannot be selected in the TCP/IP property sheet.

3. Can't answer that - never used it

4. Can you clarify on this ?

On Wed, 15 Sep 1999 21:20:03 +0800, "Daniel Domain"
<dan4dan@magix.com.sg> wrote:

>Hi there,
>            Can someone please help me? I having a NT 4 server and a Novell
>4.11 Server, workstations running Intranetware Client. Protocol: TCP/IP and
>IPX/SPX. I need to install a ISDN card (internal) on the NT server to allow
>personnel with ISDN connection at home to dial in, so that they can work
>from home.
>
>Questions are:
>                1.    Is it possible to install a internal ISDN modem?
>                2.    Can I assign a IP to the internal card?
>                3.    I will be install a firewall product (eg. Checkpoint)
>in the future,
>                       can the remote user walk through the firewall and
>connect to the lan.
>                       Because from what I heard firewall product like
>Checkpoint runs
>                       only TCP/IP. So how to configure?
>                4.    Where will be the authentication be?
>
>            Can the above be configure?
>
>
>Daniel
>
>
>
>

Gerd Ziran
[MVP-DTS, ClubWin]

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads