🚀 go-pugleaf

I'm using an x-link 28.8 modem and WIN95.

Problem:
How can I set the inet string such that I get  Error-control and Data
compression set to ON? I enclose a modem log.

I have got a manual but there are so many words and abbreviations that
I do not understand.

Please help.


08-07-1997 20:17:19.27 - Standard 28800 bps-modem in use.
08-07-1997 20:17:19.28 - Modem type: Standard 28800 bps-modem
08-07-1997 20:17:19.28 - Modem inf path: MDMGEN.INF
08-07-1997 20:17:19.28 - Modem inf section: Gen288
08-07-1997 20:17:19.53 - 115200,N,8,1
08-07-1997 20:17:19.67 - 115200,N,8,1
08-07-1997 20:17:19.67 - 115200,N,8,1
08-07-1997 20:17:19.68 - Initializing modem.
08-07-1997 20:17:19.68 - Send: AT<cr>
08-07-1997 20:17:19.68 - Recv: AT<cr>
08-07-1997 20:17:19.78 - Recv: <cr><lf>OK<cr><lf>
08-07-1997 20:17:19.78 - Interpreted response: Ok
08-07-1997 20:17:19.78 - Send: ATE0V1<cr>
08-07-1997 20:17:19.78 - Recv: ATE0V1<cr>
08-07-1997 20:17:19.87 - Recv: <cr><lf>OK<cr><lf>
08-07-1997 20:17:19.87 - Interpreted response: Ok
08-07-1997 20:17:19.87 - Send: AT<cr>
08-07-1997 20:17:19.97 - Recv: <cr><lf>OK<cr><lf>
08-07-1997 20:17:19.97 - Interpreted response: Ok
08-07-1997 20:17:19.97 - Send: AT%C1\T15 S0=2<cr>
08-07-1997 20:17:20.08 - Recv: <cr><lf>OK<cr><lf>
08-07-1997 20:17:20.08 - Interpreted response: Ok
08-07-1997 20:17:20.09 - Dialing.
08-07-1997 20:17:20.09 - Send: ATDT########<cr>
08-07-1997 20:17:40.60 - Recv: <cr>
08-07-1997 20:17:40.60 - Interpreted response: Informative
08-07-1997 20:17:40.60 - Recv: <lf>
08-07-1997 20:17:40.60 - Interpreted response: Informative
08-07-1997 20:17:40.60 - Recv: CONNECT 115200
08-07-1997 20:17:40.60 - Interpreted response: Connect
08-07-1997 20:17:40.60 - Connection established at 115200bps.
08-07-1997 20:17:40.60 - Error-control off or unknown.
08-07-1997 20:17:40.60 - Data compression off or unknown.
08-07-1997 20:17:41.21 - 115200,N,8,1
08-07-1997 20:18:21.94 - Hanging up the modem.
08-07-1997 20:18:21.94 - Hardware hangup by lowering DTR.
08-07-1997 20:18:23.15 - WARNING: The modem did not respond to
lowering DTR.  Trying software hangup...
08-07-1997 20:18:23.15 - Send: +++
08-07-1997 20:18:24.62 - Recv: <cr><lf>NO CARRIER<cr><lf>
08-07-1997 20:18:24.62 - Interpreted response: No Carrier
08-07-1997 20:18:24.62 - Send: ATH<cr>
08-07-1997 20:18:25.35 - Recv: <cr><lf>OK<cr><lf>
08-07-1997 20:18:25.35 - Interpreted response: Ok
08-07-1997 20:18:25.44 - Session Statistics:
08-07-1997 20:18:25.44 -                Reads : 11660 bytes
08-07-1997 20:18:25.44 -                Writes: 3323 bytes
08-07-1997 20:18:25.44 - Standard 28800 bps-modem closed.

regards
-- 
Poul Nylander          
Agerskovvej 55         pgnyl@image.dk
DK-2610 Roedovre
Denmark
--