[ENGLISH] Crosspoint *SITS AND WAITS* after successful mail transfer - Thread - go-pugleaf

Thread View: de.comm.software.crosspoint

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by rsingh Mon, 05 Jun 1995 00:00

[ENGLISH] Crosspoint SITS AND WAITS after successful mail transfer

#195

Author: rsingh
Date: Mon, 05 Jun 1995 00:00

19 lines
1684 bytes

Ok, folks, I have another Crosspoint question.

I have a *working* "multiuser" crosspoint setup; for now, only the 'f'
protocol works, which gives about 920 cps on a 9600 connection, on text
files. This is not too great, but phone call is *local*, so this is not a
problem. 

I have changed most of the wait times for the modem to smaller, more 
reasonable values. For example, the "wait between redials is set to 8 
seconds" as that is more than sufficient here.

Now the QUESTION: When I do a "Netcall", modem connects, uucp.scr script
is used, mail files are transferred, successfully.  THEN CROSSPOINT SIMPLY
SITS AND WAITS! For as long as 100-120 seconds. Only after this time it
starts to process the files it just downloaded. How can I reduce this wait
to more like 15-30 seconds?  What parameter do I need to change?  This is
IMMEDIATELY after UUCICO has finished transferring files. 

Thanks a lot. --raj (raj@shiela.com)

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads