STILL LOOKING FOR EXPRESS-TOOLS

Thread View: de.comp.databases

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Frank Lenzen Mon, 09 Nov 1992 08:25

#21

Author: Frank Lenzen
Date: Mon, 09 Nov 1992 08:25

32 lines
1955 bytes

Information on EXPRESS tools wanted!

If you have any tools which are related to the upcoming ISO standard 
EXPRESS (e.g. parser, constraint checker, databases, EXPRESS-G tools, 
EXPRESS-G to EXPRESS translator and vice versa, etc.), we would be very 
happy to hear from you. 

We are using EXPRESS very intensively in our work on modelling the 
domain of CAD objects in electronic design. Furthermore, we are planning 
to establish a tutorial on EXPRESS in a European  context, and our 
interest is  
(1)	to give an overview on existing EXPRESS tools,
(2)	to demonstrate EXPRESS tools, and 
(3)	to provide some good tools to support the participants' 
first practical steps in modelling with EXPRESS. 

If you can provide some information on available EXPRESS tools (either 
about tools which have been implemented by yourself or about tools which 
you are using), please contact us at the following address:





++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ FernUniversitaet Hagen   +  Frank Lenzen                   +
+ Praktische Informatik I  +                                 +
+ Feithstr. 140            +                                 +
+ W - 5800 Hagen 1         +  EMail: lenzen@fernuni-hagen.de +
+ Germany                  +  Fax-No. :  +49.2331.987.314    +
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads