🚀 go-pugleaf

In <2574@rnivh.rni.sub.org> root@rnivh.rni.sub.org (Torsten Leibold) writes:

>Herrje, diese daemlichen Manuals rauben mir mal wieder den letzten
>Nerv. Jetzt habe ich 2 Stunden versucht einen Hinweis zu finden, wie
>diese Datei aufgebaut werden muss, damit bei mir nicht staendig diese
>Meldung 'b queue max run limit reached ...' erscheint.
>Kann mir da jemand weiterhelfen ?? Vielleicht ist es ja gar nicht so
>schwer ... Sieht zumindest recht einfach aus ...

>From: guy@Auspex.COM (Guy Harris)
>Newsgroups: comp.unix.admin
>Subject: Re: Help with SYSV queuedefs(5)
>Keywords: cron,queuedefs,man
>Message-ID: <12145@auspex-gw.auspex.com>
>Date: 14 Mar 92 02:52:51 GMT
>References: <1992Mar12.131615.6471@essnj3.essnjay.com>
>Sender: news@auspex-gw.auspex.com
>Organization: Auspex Systems, Santa Clara
>Lines: 270
>Nntp-Posting-Host: auspex.auspex.com

>>I have been unable to nail down queuedefs(5) in first, second or third
>>party documentation re SYSV.

Here's the man page I wrote for "queuedefs", ages ago, and put into
SunOS at some point; if AT&T hasn't yet picked it up, they should do so.

Now, since you say "queuedefs(5)", rather than "queuedefs(4)", you may
be running an OS with V7-style manual page section numbers, rather than
SV-style.  One such OS is SunOS, but there's been a "queuedefs(5)" since
SunOS 4.1, at least.  In any case, *these* manual pages - I'm sticking
in "proto(4)" as well - are for SVR3, and if your system isn't vanilla
SVR3, they may have to be modified.

#! /bin/sh
# This is a shell archive.  Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file".  To overwrite existing
# files, type "sh file -c".  You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g..  If this archive is complete, you
# will see the following message at the end:
#		"End of shell archive."
# Contents:  proto.4 queuedefs.4
# Wrapped by guy@bootme on Sat Feb  4 15:06:52 1989
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'proto.4' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'proto.4'\"
else
echo shar: Extracting \"'proto.4'\" \(2033 characters\)
sed "s/^X//" >'proto.4' <<'END_OF_FILE'
X.TH PROTO 4
X.SH NAME
Xproto \- prototype job file for at
X.SH SYNOPSIS
X.LP
X.B /usr/lib/cron/.proto
X.LP
X.BI /usr/lib/cron/.proto. queue
X.SH DESCRIPTION
X.LP
XWhen a job is submitted to
X.IR at (1)
Xor
X.IR batch (1),
Xthe job is constructed as a shell script.  First, a prologue is
Xconstructed, consisting of:
X.IP \(bu 3
XA header specifying whether the job is an
X.I at
Xjob or a
X.I batch
Xjob;
X.IP \(bu
XA set of Bourne shell commands to make the environment (see
X.IR environ (4))
Xfor the
X.I at
Xjob the same as the current environment.
X.LP
X.I at
Xthen reads a \*(lqprototype file,\*(rq and constructs the rest of the
Xjob file from it.
X.LP
XText from the prototype file is copied to the job file, except for
Xspecial \*(lqvariables\*(rq that are replaced by other text:
X.RS
X.TP
X.B $d
Xis replaced by the current working directory
X.PD 0
X.TP
X.B $l
Xis replaced by the current file size limit (see
X.IR ulimit (2))
X.TP
X.B $m
Xis replaced by the current umask (see
X.IR umask (2))
X.TP
X.B $t
Xis replaced by the time at which the job should be run, expressed as seconds
Xsince January 1, 1970, 00:00 Greenwich Mean Time, preceded by a colon
X.TP
X.B $<
Xis replaced by text read by
X.I at
Xfrom the standard input (that is, the commands provided to
X.I at
Xto be run in the job)
X.PD
X.RE
X.LP
XIf the job is submitted in queue
X.IR queue ,
X.I at
Xuses the file
X.BI /usr/lib/cron/.proto. queue
Xas the prototype file if it exists, otherwise it will use the file
X.BR /usr/lib/cron/.proto .
X.SH EXAMPLES
XThe standard
X.B .proto
Xfile supplied with System V is:
X.LP
X.RS
X.nf
X.ft B
X#ident	"@(#)adm:.proto	1.2"
Xcd $d
Xulimit $l
Xumask $m
X$<
X.ft R
X.fi
X.RE
X.LP
Xwhich causes commands to change the current directory in the job to the
Xcurrent directory at the time
X.I at
Xwas run, to change the ulimit in the job to the ulimit at the time
X.I at
Xwas run, and to change the umask in the job to the umask at the time
X.I at
Xwas run, to be inserted before the commands in the job.
X.SH FILES
X.PD 0
X.TP 20
X.B /usr/lib/cron/.proto
X.LP
X.BI /usr/lib/cron/.proto. queue
X.PD 
X.SH "SEE ALSO"
X.IR at (1)
END_OF_FILE
if test 2033 -ne `wc -c <'proto.4'`; then
    echo shar: \"'proto.4'\" unpacked with wrong size!
fi
# end of 'proto.4'
fi
if test -f 'queuedefs.4' -a "${1}" != "-c" ; then 
  echo shar: Will not clobber existing file \"'queuedefs.4'\"
else
echo shar: Extracting \"'queuedefs.4'\" \(2386 characters\)
sed "s/^X//" >'queuedefs.4' <<'END_OF_FILE'
X.TH QUEUEDEFS 4
X.SH NAME
Xqueuedefs \- queue description file for at, batch, and cron
X.SH SYNOPSIS
X.LP
X.B /usr/lib/cron/queuedefs
X.SH DESCRIPTION
X.LP
XThe
X.B queuedefs
Xfile describes the characteristics of the queues managed by
X.IR cron (1M).
XEach non-comment line in this file describes one queue.
XThe format of the lines are as follows:
X.RS
X.LP
X\fIq\fB.\fR[\fInjob\fBj\fR][\fInice\fBn\fR][\fInwait\fBw\fR]
X.RE
X.LP
XThe fields in this line are:
X.RS
X.TP
X.I q
XThe name of the queue.
X.B a
Xis the default queue for jobs started by
X.IR at (1);
X.B b
Xis the default queue for jobs started by
X.I batch
X(see
X.IR at (1));
X.B c
Xis the default queue for jobs run from a
X.IR crontab (4)
Xfile.
X.TP
X.I njob
XThe maximum number of jobs that can be run simultaneously in that queue; if
Xmore than
X.I njob
Xjobs are ready to run, only the first
X.I njob
Xjobs will be run, and the others will be run as jobs that are currently running
Xterminate.  The default value is 100.
X.TP
X.I nice
XThe
X.IR nice (1)
Xvalue to give to all jobs in that queue that are not run with a user
X.SM ID
Xof super-user.  The default value is 2.
X.TP
X.I nwait
XThe number of seconds to wait before rescheduling a job that was deferred
Xbecause more than
X.I njob
Xjobs were running in that job's queue, or because more than 25 jobs were
Xrunning in all the queues.  The default value is 60.
X.RE
X.LP
XLines beginning with
X.B #
Xare comments, and are ignored.
X.SH EXAMPLE
X.RS
X.nf
X.ft B
Xa.4j1n
Xb.2j2n90w
X.RE
X.fi
X.ft R
X.LP
XThis file specifies that the
X.B a
Xqueue, for
X.I at
Xjobs, can have up to 4 jobs running simultaneously; those jobs will be run with
Xa
X.B nice
Xvalue of 1.  As no
X.I nwait
Xvalue was given, if a job cannot be run because too many other jobs are running
X.I cron
Xwill wait 60 seconds before trying again to run it.
XThe
X.B b
Xqueue, for
X.I batch
Xjobs, can have up to 2 jobs running simultaneously; those jobs will be run with
Xa
X.I nice
Xvalue of 2.  If a job cannot be run because too many other jobs are running,
X.I cron
Xwill wait 90 seconds before trying again to run it.
XAll other queues can have up to 100 jobs running simultaneously; they will be
Xrun with a
X.I nice
Xvalue of 2, and if a job cannot be run because too many other jobs are running
X.I cron
Xwill wait 60 seconds before trying again to run it.
X.SH FILES
X.PD 0
X.TP 20
X.B /usr/lib/cron/queuedefs
X.PD 
X.SH "SEE ALSO"
X.IR at (1),
X.IR nice (1),
X.IR crontab (4),
X.IR cron (1M)
END_OF_FILE
if test 2386 -ne `wc -c <'queuedefs.4'`; then
    echo shar: \"'queuedefs.4'\" unpacked with wrong size!
fi
chmod +x 'queuedefs.4'
# end of 'queuedefs.4'
fi
echo shar: End of shell archive.
exit 0

-- 
				Christoph Badura  ---  bad@flatlin.ka.sub.org

AIX is a better... is a better...  is a better... OpenSystem.
					IBM Rep at GUUG Symposium '92