Re: MTU,MSS bei Slip...

Article View: de.comp.sys.amiga.comm

Article #116

Back to de.comp.sys.amiga.comm Previous Next

#116

From: Bernhard Moellemann
Date: Sat, 09 Sep 1995 10:54

18 lines
1149 bytes

Markus Dages fragte:

> gibt es irgendwelche Richtlinien oder RFC's in denen beschrieben
> ist welche Werte man fuer MTU,MSS etc. bei Slip Verbindungen angibt ??

Leider nichts definitives. Es steht nur eine Empfehlung (SLIP ist halt
kein Standard 8-) in RFC 1055:

|   Because there is no 'standard' SLIP specification, there is no real
|   defined maximum packet size for SLIP.  It is probably best to accept
|   the maximum packet size used by the Berkeley UNIX SLIP drivers: 1006
|   bytes including the IP and transport protocol headers (not including
|   the framing characters).  Therefore any new SLIP implementations
|   should be prepared to accept 1006 byte datagrams and should not send
|   more than 1006 bytes in a datagram.

      Bernhard    //
                \X/

Technical Details

Message-ID: <93298745@mhystic.hall.sub.org>

Path: arc1-ca.pugleaf.net!mhystic.hall.sub.org!not-for-mail

References: <090995f0202@paradise.sub.org>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!mhystic.hall.sub.org!not-for-mail
Newsgroups: de.comp.sys.amiga.comm
References: <090995f0202@paradise.sub.org>
From: "Bernhard Moellemann" <zza@mhystic.hall.sub.org>
Date: Sat, 09 Sep 1995 11:54:39 +0100
X-NewsReader: znews 0.1
Subject: Re: MTU,MSS bei Slip...
Message-ID: <93298745@mhystic.hall.sub.org>
Organization: Mhystic Hall

Reply to Parent Message