Re: Q1080S Terminierung

Article View: de.comp.sys.amiga.tech

Article #2855

Back to de.comp.sys.amiga.tech Previous Next

#2855

From: Martin Schulze
Date: Tue, 09 Jan 1996 10:33

17 lines
1215 bytes

geohei@ibm.net (Georges Heinesch) schrub:

GH> - Der Jumper TE, setzt er lediglich die TermPWR auf +5V oder schaltet er
GH>   die angeschlossenen Terminatoren ein?

Zitat aus der Quantum-Doku:
"Terminating resistors are factory installed. They are required to
terminate the SCSI bus when the drive is the last device on the
cable. If not the last device, remove all the resistor packs, or
on the PD1225/....  remove the TE Jumper."


 Martin

Tom-Dooley-Error -- "Hang down your head..."

*e-mail: schulze@phil.uni-sb.de

Technical Details

Message-ID: <w8mCMMD7Daez2@msch.outside.sb.sub.de>

Path: arc1-ca.pugleaf.net!OUTSIDE.sb.sub.de!MSCH!m_schulze

References: <2898.6580T696T768@ibm.net>

Show Full Headers

Complete Article Headers

ZC-TELEFON: ++49 6831 506171
ZC-POST: Parkstrasse 14; 66806 Ensdorf
X-Mailer: MicroDot 1.10 [REGISTERED 00007d] via ANUBIS V 0.555a / ZSort V 1.44b
Message-ID: <w8mCMMD7Daez2@msch.outside.sb.sub.de>
Organization: Saarbruecker Amiga User Group e.V.
X-Gateway: ZCONNECT UR hit.sb.sub.de [DUUCP BETA vom 09.01.1996]
References: <2898.6580T696T768@ibm.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
From: m_schulze@outside.sb.sub.de (Martin Schulze)
Subject: Re: Q1080S Terminierung
Date: 09 Jan 1996 11:33:16 +0100
Path: arc1-ca.pugleaf.net!OUTSIDE.sb.sub.de!MSCH!m_schulze
Newsgroups: de.comp.sys.amiga.tech
Distribution: world

Reply to Parent Message