🚀 go-pugleaf

 In article <315f9c0f.313017@news.demon.co.uk>
  jtyrrell@eclipse1.demon.co.uk (James Tyrrell) said:-

>I am trying to get STiK to connect my ST to my PC (runnning Linux)
>with a serial cable but  I dont seem to be able to get the script to
>connect and send the login and passwd etc.  On the linux side I get
>something like "dip -+++"  (normally this would be "dip -bob" if
>someone was connecting with username bob).  Is STiK sending the 
>"+++" as the login name?  It would be much easier if I could do a
>manual login, is this possible in STiK?

What is the process like logging in with a comms package to the pc over a 
serial cable? remember you need to be able to enable a slip login on 
linux on your pc.. 
What does your stik dial.scr look like? 
the +++ looks like the st's trying to do a modem reset have you 
disabled the modem init etc bits in the dial.scr and set it up for a 
sirect connection as is says in the example script?

Flinny.
__


                     <    Nicholas Flintham     >
                    >  Nick@Flinny.demon.co.uk   <
                  <     N.P.Flintham@unn.ac.uk     >
                 >   Http://www.unn.ac.uk/~cju920/  <
                  >  Falcon 030/4/1160/FPU/LINUX   <