🚀 go-pugleaf

At 13:23:16 on 18 Feb 96, dbrewood@nest.demon.co.uk wrote this about 
MultiTech MT2834ZDXK V34 modem.
 d> If anyone uses such a modem, and can assist at all it would be greatly
 d> appreciated, especially with any recommended settings as everything
 d> I've tried to set up in the manner expected tended to make maters
 d> worse.

I use this very modem.

 d> atl5
 d> B0 E1 M0 Q0 R0 V1 X4 &E1 &E4 &E6 &E8 &E10 &E13 &E15 %C0 #C1 &C1 L3
 d> $MB28800 $SB38400 $BA0 &W0

atl5
B0 E1 M3 Q0 R0 V1 X4 &E1 &E4 &E7 &E8 &E11 &E13 &E15 %C0 #C1 &C1 L0
$MB28800 $SB38400 $BA0 &W0

M3      =   Speaker on during dial but off during handshake
&E6     =   XON/XOFF _not_ passed through when &E5 selected
&E7     =   XON/XOFF passed through when &E5 selected
&E10    =   Non-Error corrected mode flow control off
&E11    =   Non-Error corrected mode flow control on
L0      =   You tell me!
L3      =   You tell me!


 d> atl6
 d> S0   S2   S3   S4   S5   S6   S7   S8   S9   S10  S11  S13  S24  S25
 d> 000  043  013  010  008  004  055  004  006  007  080  037  020  000
 d> S30
 d> 000

atl6
S0   S2   S3   S4   S5   S6   S7   S8   S9   S10  S11  S13  S24  S25  S30
000  043  013  010  008  004  055  004  006  007  080  037  020  000  000

 d> atl7
 d> $A0 &A0 #A0 &B0 &BS1 $D0 &D2 %DL0 %DC0 $EB0 1.112538E-3081 1.117918E-
 d> 3084 #F2 $F0 &G2 #L0
 d> &P1 &Q0 $R0 &R1 &RF1 &S1 &SF0 &T5 #T1 $T1 $V0 $V6 $VD0 Y0
 d> $MB28800 $SB38400 $BA0 &W0

atl7
$A1 &A0 #A0 &B0 &BS1 $D0 &D2 %DL0 %DC0 $EB0 1.112541E-3081 1.117918E-3085 #F2 $F0 &G2 #L0
&P1 &Q0 $R0 &R1 &RF1 &S1 &SF0 &T4 #T1 $T1 $V0 $V6 $VD1 Y0
$MB28800 $SB38400 $BA0 &W0

$A0     =   Discard data received during establishment of reliable
            connection
$A1     =   Do not discard data
1.112541E-3081     =   Something you posted with didn't like this!
1.112541E-3085     =   Ditto!
&T4     =   Enable response to remote digital loopback
&T5     =   Disable response to remote digital loopback
$VD0    =   ?
$VD1    =   ?

No idea what L0/L3 or $VD0/$VD1 are.  If you want to Freq files from my BBS I 
have some good Multitech related stuff including POCKET.ZIP which contains 
lots of stuff in the manuals.

Just foubnd out that $VD1 means enable voice/data dialing and $VD0 disables

.. Shake off your heavy trance! And leap into a dance.
--

ATB,
    Karl.

Cameo Network Services Ltd., Suite 214,  +----------------------------+
York House, 2-4 York Road,               |Novell authorised reseller, |
Felixstowe, Suffolk, England.            |training and consultancy    |
Tel: 01394-672004  Fax: 01394-271210     +----------------------------+