🚀 go-pugleaf

On Sat, 17 Feb 96 17:37:58 ,Twas none other than Paul Baker who did state ....
> In a previous message Nick@flinny.demon.co.uk wrote 
>  > 
>  > 
>  >> Could any kind soul please advise what figure to set in STARTUP.NOS
>  >> for working with a Falcon and a 28.8kb modem?
>  > 
>  > Hi Daron,
>  > 
>  > This is my modem line for my Falcon you need to have Hsmodem loaded
>  > and I think the modem.cpx file with the modem port set to 150 as well
>  > to lock the serial port At least thats the way I have done it and it
>  > works fine.
>  > 
>  > # Attach the SLIP driver to the serial port
>  > #      if  port 0 slip dev buff mru  baud
>  > #      --- ---- - ---- --- ---- ---  ----
>  > attach asy AUX: 0 ppp sl0 32767 1500 150
>  > 

> Though have you noticed the pauses between messages....the max CPS rate I get 
> using this setup here is 1800 !!...Which is rediculous..

> when I should be getting around 3000+    I get 1500-1600 just using a 19200 
> port speed.

try reducing the MTU value and make sure the MRU value is set to the same value.
(see previous message)

-- 
---- Atari Falcon030(32) Linux68K site ----        
Graham Irvine :  graham@grasper.demon.co.uk
-------------------------------------------