🚀 go-pugleaf

On 20 Sep 1997 19:19:17 GMT, tross3@hamtel.tds.net (Terry Ross) wrote:

>Hi,
>
>I have a couple of questions about Oasis, I've been trying to get it to
>work, both version 2 w/ICE and v.1.35e w/NOS - and I'm not getting
>anywhere.  With ICE, I log on & it starts sending and receiving packets,
>but nothing useful happens.  With NOS, I can log on, but I can't get
>it to read my IP Address.... what is the correct format in the dial.txt
>file?
>  1   send $GET_IP
>  2   send $GET_IP\r
>  3   send "$GET_IP"
>  4   send "$GET_IP\r"
>
>And finally, the reason I want to try them is to see if I can upload
>with PORT & STOR - am I wasting my time?  Does Oasis support the PORT
>command, or only PASV?
>
>Thanks in advance,

Can't help with oasis2 but with 1.xx you don't specify your IP address
in dial.txt - you do it in startup.nos where you should see something
like this ...

ip addr [158.152.224.11]

... but this only works if you have a static ip address. If yours is
dynamic enter [0.0.0.0] whereupon Nos will obtain it for you although
I'm not certain there isn't something else that needs doing as well.
Someone else will no doubt say if there is.


-- 
guy@swampdog.demon.co.uk
http://www.swampdog.demon.co.uk