🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: demon.ip.support.atari
1 messages
1 total messages Started by cwesterh remove-this Cecil Weste... Tue, 16 Sep 1997 00:00
problems with using CD-ROM drive
#271
Author: cwesterh remove-this Cecil Weste...
Date: Tue, 16 Sep 1997 00:00
31 lines
1558 bytes
Not long ago I bought a CD-ROM drive. In principal a nice buy, but I
do have a few problems.
I use ICD-PRO as a harddisk driver with write cache enabled. I never
had a problem with this (and it does speed things up), but when I used
my CD-ROM my whole harddisk got corrupted. (And I had not made a
backup for several years, because I never needed it.) With the write
cache disabled, everything seems fine, but I keep my fingers crossed
about this.
Another problem is that on one of my CD's there are very many files
and directories. The first are recognised, but after a certain point,
directories are empty and file's also.
When I start my system (or sometimes init later on my CD-ROM driver) I
get the following messages:

AtariMetados			(june 01, 1994)
Version 2.31			RMS, RJZ
Copyright Atari Corporation	1994

Hard&Soft CD-ROM driver 1.20
SCSI 1: Sony CD-ROM CDU-8003a1.9a
CDROM driver (c) H&S 1994 installed as a: on SCSI 1
Hard&Soft Iso9660 filesystem 1.20
Metados device A: CDROM driver (c) H&S 1994
Hard&Soft Iso9660 FS driver installed as O:

What can I do about these problems?

Greetings,

Cecil.
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads