Thread View: demon.ip.support.atari
2 messages
2 total messages
Started by Mark Parry
Mon, 22 Sep 1997 00:00
Re: NNTP Problems
Author: Mark Parry
Date: Mon, 22 Sep 1997 00:00
Date: Mon, 22 Sep 1997 00:00
48 lines
1912 bytes
1912 bytes
In article <874850394_OASIS_@denr.demon.co.uk>
denr@denr.demon.co.uk (Denniss Riches (Far, Far Beyond Bedlam)) said:-
>I obtain a PPP connection to Demon using Oasis v135, NOS .045 and of course
>startup.nos.
>
>When I send a newsletter I get the following messages.
>
>Connected to news server
><200 news.demon.co.uk NewsBorg [nnrp-02]
>>GROUP Comp.sys.atari.st (OR WHOEVER)
><211 939 64422 65771 comp.sys.atari.st group selected
>>GROUP
><501 command syntax error
>501 command syntax error
>ETC.ETC.
>
>Obviously Demon is looking for more than 1 group, or is this a very basic
>routine to check for any more newsletters to be sent??
Sorry, but I can't answer your question. I have one, however.
How the Hell are you managing to get a PPP connection to Demon using
Oasis 1.35 ?
Since Demon went over to the Energis ROMPs, I've only been able to get a SLIP
connection using Oasis 1.35. Slowed the bleedin' CPS rate right down, that
has :o(
Does anyone know whether I can get PPP back, and how ?
Thanks,
See ya,
Mark.
__
_/_/_/ _/_/_/ _/_/_/_/_/ Aka Mark Parry. |||
_/ _/ _/ _/ _/ Email: Paz@wile.demon.co.uk |||
_/_/_/_/ _/_/_/_/ _/ WWW: http://www.wile.demon.co.uk/ / | \
_/ _/ _/ _/ IRC: #atari Falcon030
_/ _/ _/ _/_/_/_/_/ #WiLDHEARTS Motorola Inside
Re: NNTP Problems
Author: Guy Harrison
Date: Thu, 25 Sep 1997 00:00
Date: Thu, 25 Sep 1997 00:00
63 lines
2687 bytes
2687 bytes
On Mon, 22 Sep 97 00:16:34 GMT, paz@wile.demon.co.uk (Mark Parry) wrote: > > In article <874850394_OASIS_@denr.demon.co.uk> > denr@denr.demon.co.uk (Denniss Riches (Far, Far Beyond Bedlam)) said:- > >>I obtain a PPP connection to Demon using Oasis v135, NOS .045 and of course >>startup.nos. >> >>When I send a newsletter I get the following messages. >> >>Connected to news server >><200 news.demon.co.uk NewsBorg [nnrp-02] >>>GROUP Comp.sys.atari.st (OR WHOEVER) >><211 939 64422 65771 comp.sys.atari.st group selected >>>GROUP >><501 command syntax error >>501 command syntax error >>ETC.ETC. >> >>Obviously Demon is looking for more than 1 group, or is this a very basic >>routine to check for any more newsletters to be sent?? > >Sorry, but I can't answer your question. I have one, however. >How the Hell are you managing to get a PPP connection to Demon using >Oasis 1.35 ? > >Since Demon went over to the Energis ROMPs, I've only been able to get a SLIP >connection using Oasis 1.35. Slowed the bleedin' CPS rate right down, that >has :o( I forget which, either nos starts with passive negotiation or the ascends are sluggish in starting up and miss it. In either case, the ascends need active negotiation and they don't get it. (Basically the demon end waits for us to say hello instead of the other way round.) >Does anyone know whether I can get PPP back, and how ? Turn PPP back on and log on with your login script visible. Wait for 10 or so seconds after its complete then type ppp lcp ... you will see a line that sez "LCP listening -- waiting for remote host to attempt open". It means what it says. Nos won't do anything until the ascend sez hello. Unfortunately the ascend is doing exactly the same thing! Type ... ifconfig sl0 up ... which sez hello. Now type "ppp lcp" again and you should see the text change to "negotiating" or "negotiated/connected" (its obvious). This always works so assign "ifconfig sl0 up" to a function key. If you're really lucky putting "status up" at the end of your dial.txt will have the same effect, the advantage being its automatic. -- guy@swampdog.demon.co.uk http://www.swampdog.demon.co.uk
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads