🚀 go-pugleaf

 In article <874887394_OASIS_@wile.demon.co.uk>
  paz@wile.demon.co.uk (Mark Parry) said:-

>
> In article <874850394_OASIS_@denr.demon.co.uk>
>  denr@denr.demon.co.uk (Denniss Riches (Far, Far Beyond Bedlam)) said:-
>
>>I  obtain a PPP connection to Demon using Oasis v135, NOS .045 and of course
>>startup.nos.
>>
>>When I send a newsletter I get the following messages.
>>
>>Connected to news server
>><200 news.demon.co.uk NewsBorg [nnrp-02]
>>>GROUP Comp.sys.atari.st (OR WHOEVER)
>><211 939 64422 65771 comp.sys.atari.st group selected
>>>GROUP
>><501 command syntax error
>>501 command syntax error
>>ETC.ETC.
>>
>>Obviously Demon is looking for more than 1 group, or is this a very basic
>>routine to check for any more newsletters to be sent??  
>
>Sorry, but I can't answer your question. I have one, however.
>How the Hell are you managing to get a PPP connection to Demon using 
>Oasis 1.35 ? 
>
>Since Demon went over to the Energis ROMPs, I've only been able to get a SLIP
>connection using Oasis 1.35. Slowed the bleedin' CPS rate right down, that 
>has :o(
>
>Does anyone know whether I can get PPP back, and how ? 
>
>Thanks,
>
>See ya,
>
>Mark.
>__

If I remember correctly ,back in March, "Swampdog" posted a news article giving
details of his startup.nos and dial.txt files and a command "ifconfig s10up" 
that has to be entered once logged-in.

I've copied my files below. It may be possible to place the "ifconfig..."
command in the dial.txt keyed by the demon "hullo". 
   
DON'T FORGET THAT I'M USING NOS v.045
#
#       Sample dialer script for login to Demon Internet Services
#
#  replace 'site' and 'password' with your values
#
configure:
init "ATZ1\r"
dial_cmd "ATDT"
ld_code         ""
#number "08453535666\r"
number "08453535666\r"
retries         5
#
execute:
init
cwait  10000 "OK"
dial
cwait  25000 "CONNECT" "BUSY" "NO CARRIER" 
cwait 30000  "gin:" "NO CARRIER" 
wait 1000
send "denr\r"
wait 60000 "word:" 
wait  1000
send "PASSWORD"
wait 60000 "ocol:" 
wait 1000 
send "ppp mru=1500 idle=0\r"
wait 60000 "HELLO"

# startup file for KA9Q-NOS ST (DIS Version) 

hostname denr.demon.co.uk

ip addr [194.222.58.113]

# Attach the SLIP driver to the serial port 
#      if  port 0 slip dev buff mru  baud
#      --- ---- - ---- --- ---- ---  ----
attach asy AUX: 0 ppp sl0 32767 1500  57600

# how many hops before a packet is discarded (Time To Live)
ip ttl 64

# tcp parameters can be tuned. 
tcp mss 536
tcp window 32000
tcp irtt 3000
tcp syndata on

# ppp parameters
ppp sl0 lcp local mru 576
ppp sl0 lcp remote mru 576
ppp sl0 lcp local accm 0x000a0000
ppp sl0 lcp local pfc on
ppp sl0 lcp local acfc on
ppp sl0 ipcp local compress tcp 16 1 
ppp sl0 lcp open active
ppp sl0 ipcp open active
ppp sl0 idle 600 exit

# Setup Simple Mail Transfer Protocol parameters
smtp timer 600
smtp wait 1
smtp trace 3
smtp maxclients 10
smtp beep on
smtp gateway post.demon.co.uk
smtp verbose on
smtp delay 600
smtp batch off

# Setup Network News Transfer Protocol parameters 
nntp groups demon.announce demon.ip.support.atari
nntp addserver news.demon.co.uk 3600 
nntp dir \OASIS\spool\articles
nntp trace 3
nntp verbose on
nntp batch on 16
nntp safety off
nntp newgroups off


# function keys F1-10   59-68    (do not use 68)
# sh F1-f10             84-93
# ct f1-f10             94-103
# at f1-f10             104-113
# help                  98


fkey 59 "[command]dial sl0 dial.txt\n"
fkey 60 "[command]trace sl0 k:\nos\spool\trace.log\n"

# THE NEXT COMMAND DOES IT #########
fkey 61 "[command]ifconfig sl0 up\n"

fkey 62 "[command]smtp kick\n"
fkey 63 "[command]nntp kick\n"
fkey 64 "[command]finger denr@post.demon.co.uk\n"
fkey 65 "[command]finger status@gate.demon.co.uk\n"
fkey 66 "[command]exit\n"
fkey 67 "[command]ppp sl0 lcp close\n"
fkey 84 "[command]ftp ftp.demon.co.uk\n"
fkey 85 "[command]ftp ftp.cnam.fr\n"
fkey 86 "[command]ftp micros.hensa.ac.uk\n"
fkey 87 "[command]ftp ftp.gui.uva.es\n"
fkey 88 "[command]ftp homepages.demon.co.uk\n"
fkey 90 "[command]ls -CFa\n"



echo refuse

# Start the servers 
start smtp
start  discard
start  finger
start ttylink

# set up the domains
domain addserver [158.152.1.72]
domain addserver [158.152.1.58]
domain addserver [158.152.1.65]
domain addserver [158.152.1.71]
domain addserver [158.152.1.193]
domain suffix demon.co.uk
domain cache clean off
domain cache size 100
domain cache wait 300

icmp echo on
icmp trace on

route add default sl0 158.152.1.200 1

log K:\OASIS\spool\nos.log

time server 158.152.1.65        
time auto on

ftpopt byte
ftpopt page on
ftpopt binary

dial sl0 dial.txt





HOPE THE ABOVE HELPS
__

  ---------------------------------------------------------------------------  
     denr@denr.demon.co.uk
  ---------------------------------------------------------------------------