Thread View: demon.ip.support.atari
2 messages
2 total messages
Started by Simon Husbands
Sun, 23 Mar 1997 00:00
Re: OASIS v210 - ICE-NET
Author: Simon Husbands
Date: Sun, 23 Mar 1997 00:00
Date: Sun, 23 Mar 1997 00:00
52 lines
2067 bytes
2067 bytes
In article <859059448_OASIS_@denr.demon.co.uk>
denr@denr.demon.co.uk (Denniss Riches) said:-
>I finally managed to access the Web, using Cab-Stik, and successfully
>downloaded OASIS v210 from WWW.YEADONTT...., thanks Phil.
>
>I carefully unpacked it into a clean and empty partition.
>
>BUT, every time I attempt to run ICE_NET it gets as far as the window menu
>then HANGS.
>
>I am determined to make this software work!!
>
>So practical solutions only please, not alternatives.
>
>My hardware is ATARI 1040STFM, TOS 102, 4meg RAM, 250meg Hard Drive,
>Mono Monitor etc.
>
>Here's hoping and thanks
>
>Denr
>__
Hi Denniss........
I've been trying to get Oasis2 working ever since it came out ( seems like maybe
a year ago? ) with little success. The last contact I had with Phil was a couple
of months ago, and it seems that Oasis2 may NOT WORK with TOS 1.02 ( which I
have and you seem to also.) He was going to get a beta together to check this
out, but I've pretty much given up on it now. I believe him. There are so many
things that Oasis should do that just will not work on my machine that I think
something is afoot.
I wish you luck - if you manage to get it working LET ME KNOW!
Simon
__
=--------------------------------------------------------------------------=
Your friend and mine, SIMON HUSBANDS simon@husbands.demon.co.uk
Music, Minis, Pianos, Photos, Soot Juggling - they're all at our site!!
http://www.husbands.demon.co.uk
=--------------------------------------------------------------------------=
Re: OASIS v210 - ICE-NET
Author: Frank Nye
Date: Tue, 01 Apr 1997 00:00
Date: Tue, 01 Apr 1997 00:00
47 lines
1952 bytes
1952 bytes
In article <859123250_OASIS_@husbands.demon.co.uk>
Webmaster@husbands.demon.co.uk (Simon Husbands) wrote:-
> In article <859059448_OASIS_@denr.demon.co.uk>
> denr@denr.demon.co.uk (Denniss Riches) said:-
>
>>I finally managed to access the Web, using Cab-Stik, and successfully
>>downloaded OASIS v210 from WWW.YEADONTT...., thanks Phil.
>>
>>I carefully unpacked it into a clean and empty partition.
>>
>>BUT, every time I attempt to run ICE_NET it gets as far as the window menu
>>then HANGS.
>>
>>I am determined to make this software work!!
>>
>>So practical solutions only please, not alternatives.
>>
>>My hardware is ATARI 1040STFM, TOS 102, 4meg RAM, 250meg Hard Drive,
>>Mono Monitor etc.
>>
>>Here's hoping and thanks
>>
>>Denr
>>__
>
>Hi Denniss........
The only Oasis I'v found that works is 2.05e,I downloaded 2.10 from
a BBS (two in fact) and had the same problem as yourshelf with both of
them, I tried to run ice alone and it locks up,It seems to be a major
problem with it. I have STFM 2.5 meg TOS 1.4.
May I ask what ver' cab/stik your using I'v tried to get onto Phill's
web page without any luck at all,plus it seems to have problems finding
other pages too.
Frank
frank@lewarren.demon.co.uk
--
---------------------------------------------------------------------------
frank@lewarren.demon.co.uk
---------------------------------------------------------------------------
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads