🚀 go-pugleaf

In article <1ea1vv3.1fax67ph07pyaN%tom@dfind.com>,
tom@dfind.com (Tom Warner) wrote:

> Alan Staniforth <alan@apollonia.org> wrote:
> 
> > Yes, on the still test number 08450798667 I can get 128K with my
> > Ignition pretty reliably. 
> 
> Are you using Remote Access? What settings did you change to get 128K?

System 8.6, OT 2.0.3, MacSLIP 3.0.4 or Remote Access according to how I
feel that day, BT Ignition.

> I've got a Zoom TA. I change the CCL to 64K ISDN MLPPP and I get the MLP
> light on the box but the secound channel never picks up.
> 
> I've used ip net monitor to check speeds and  downloaded some test files
> but I never get more than 8KBs.
> 
> Any suggestions would be greatly appreciated

Not using a Zoom I can't speak with any authority of experience but if
it is like the Ignition you may need to enter the numbers twice. However
you configure it the Ignition will not bring up the second channel
unless the dial command is:

ATD08450798667&08450798667

If the Zoom is the same, or similar then the CCL script may not do this
automatically with the number you enter in Remote Access and you may
have to enter 08450798667&08450798667 or the Zoom equivalent. I don't
need to do this now but it's a long while (years) since I first got this
working and I may have edited my Ignition CCL script so I only need to
have the number entered once in Remote Access.

Sorry I can't be much more help than this - it looks like an evening
with the Docs and a text editor may be needed.

-Alan.


-- 
Alan Staniforth ** alan@apollonia.org
"Meum est propositum/In taberna mori,/Ut sint vina proxima/Morientis ori."
       -- Anon.