🚀 go-pugleaf

In article <ACC54CD596682CA18@watsonis.demon.co.uk>,
geois&dev@watsonis.demon.co.uk (Brian Spencer) wrote:

>1.  Earlier threads in this group suggest 115k connect should be possible -
>I can't get it to work higher than 57600 (get Connect on Waiting failure).

It won't work with 2.2.0, but does with 2.2.0a. You're sure you have the
right one?

A small probably pointless thought; if it fails at 115k, it seems it might
be choking on something. Check the routing of your modem lead; it might
just be picking something up. 

>2.  The documentation suggests that the connect speed is displayed.  The
>first couple of times I tried to connect, it worked OK but did not display
>a connect speed.

Mine definitely does- "Connect 28800 LAPM/ARQ" is what I think it says.
This is with a Courier. Does your modem correctly report connect speed in
something like ZTerm? That's a useful test. 

>3.  During the connect procedure, the dialog box actually displays the
>userid and password held in my connect script

Mine does too- they flash by in the box. I've not tried to prevent it, as
there seems to be no point. It's not the best possible feature, I agree.

>FYI I'm using a 6100/66 with Mac TCP2.06.

Lucky chap. I'm using a 6100/60 with MacTCP 2.04. But it all seems to work
well.

I think it's worth putting this in the newsgroup rather than in mail, in
case anybody else is kicked into commenting...

Peter