🚀 go-pugleaf

So - at last I meet THAT Jon!

Your Southdown info on how to configure ES/SBS for Demon dial-up is one of
my most quoted sources of reference.

Now, how do you feel about doing one for SBS2000 (i.e. Exchange Server 2000)
:-)

I only visited here tonight because I just received the SBS 2000 Beta pack,
and everything works - except Demon mail send/receive   :-(

If you ever revise your helpnotes, put me on the notification list!!!

Thanks!
Jann




"Jon Grieve" <jgrieve@southdown.co.uk> wrote in message
news:969264705.11415.0.nnrp-13.d4f0f5e4@news.demon.co.uk...
> Miles,
>
> You only need to configure Proxy to 'route' incoming connections if the
> machine is behind the firewall.  On SBS, you don't need to do anything
> special.
>
> I've written up a FAQ on configuring Exchange with Demon.  You can find it
> at my homepage (under Other FAQs), at:
>   http://southdown.co.uk/users/jgrieve
>
> Regards,
> Jon
>
>
>
>
>
>
> "Miles Gaynor" <mg@castlehoward.co.uk> wrote in message
> news:E604B4DA88E0D311B6A2009027E0197E09B56F@SBSSERVER...
> > Hi John,
> >
> > Yes, Exchange 5.5 but on the same machine as Proxy. (its Small business
> > Server) The IPs of the punt cluster do change, but not very often. The
> > weird thing is that if Demon send a mail kick, the mail comes through on
> > the same connection as was already present. If I had the IP of the
> > mailserver wrong and I would expect the mail to fail even after a mail
> > kick. I don't think it can be a problem with port 25 and SMTP, there
> > must be something else that Demon use to ID you apart from the
> > Username/password as you log on.
> >
> > either that or i am totally wrong. (It has been known!)
> >
> > Miles
> > >-----Original Message-----
> > >From: Jon Grieve [mailto:jgrieve@southdown.co.uk]
> > >Posted At: Thursday, September 14, 2000 4:30 PM
> > >Posted To: nt
> > >Conversation: Firewall blocks email - help!
> > >Subject: Re: Firewall blocks email - help!
> > >
> > >
> > >Miles,
> > >
> > >First, I don't think you can IP addresses for the punt
> > >cluster, as they may
> > >change.  However, for testing, this should work for the interim.
> > >
> > >So, what mail server are you using?  Exchange?  Is it running
> > >on another
> > >machine 'behind' Proxy?
> > >
> > >Jon
> > >
> > >
> > >
> > >
> > >"Miles Gaynor" <mg@castlehoward.co.uk> wrote in message
> > >news:E604B4DA88E0D311B6A2009027E0197E099060@SBSSERVER...
> > >> Hi Folks,
> > >>
> > >> I am trying to receive email through MS Proxy 2.0 from demon
> > >but when I
> > >> enable IP filtering I don't receive any email. I have made several
> > >> filters with  port 25 as smtp and the remote host as one of
> > >demons mail
> > >> servers (I think I have covered all of demons mail server IPs) but no
> > >> joy.
> > >>
> > >> Also, If I connect and ask Demon help to do a mail kick
> > >while I am still
> > >> connected, the mail comes in fine so it seems that demon
> > >don't recognise
> > >> me when I have dialed up. Does anyone know how this could be
> > >solved so
> > >> that I can have my firewall active but receive mail from demon?
> > >>
> > >> I did try opening the Ident port, but with no joy (but I'm
> > >not to clear
> > >> on how this one works)
> > >>
> > >> TIA
> > >> Miles
> > >>
> > >
> > >
> >
>
>