🚀 go-pugleaf

Hi Jon

This should take you to the form:
http://contact.microsoft.co.uk/directaccess/channelreadinesskit/
(beta is free of charge)

This will give you a taster (but is on the beta help cd anyway):
http://www.microsoft.com/directaccess/products/sbs/crk/default.asp

What is wrong with the email? - well, to be honest, your instructions for
4.0/4.5 have always worked so well out of the box, I never had the incentive
to take time to improve my Exchange Server knowledge!!! So, I don't really
know how to define it.
In a basic nutshell, outgoing mail stays in the server, and incoming mail -
doesn't. Exchange Server has been extremely revamped, so I have so far been
unable to 'guess' my way round like I used to.
Could be to do with the domain stuff - we are 'myname.co.uk' with Demon, and
on my first setup with SBS2000 - which is very DNSy - I accepted
'smallbusiness.local' (putting in 'myname.co.uk' at a later stage of the
wizard.

Sorry, bit  out of my depth. Can't wait for you to get your beta (and revise
your instructions  :-)

If you need any more info re the beta, let me know.

Jann

p.s. MS Direct Access are doing a free SBS roadshow in November - see DA
site.




"Jon Grieve" <jgrieve@southdown.co.uk> wrote in message
news:969611059.4920.0.nnrp-08.d4f0f5e4@news.demon.co.uk...
> Jann,
>
> I don't have SBS2000 yet.  Not even sure when it's officially released in
> the UK..?  You say you have a Beta, eh?  Where'd that come from?
>
> So, what does/doesn't work with ES2000 and Demon?
>
> Jon
>
>
>
>
>
> "jann" <jann@dial.pipex.com> wrote in message
> news:8qdo3m$ith$1@lure.pipex.net...
> > So - at last I meet THAT Jon!
> >
> > Your Southdown info on how to configure ES/SBS for Demon dial-up is one
of
> > my most quoted sources of reference.
> >
> > Now, how do you feel about doing one for SBS2000 (i.e. Exchange Server
> 2000)
> > :-)
> >
> > I only visited here tonight because I just received the SBS 2000 Beta
> pack,
> > and everything works - except Demon mail send/receive   :-(
> >
> > If you ever revise your helpnotes, put me on the notification list!!!
> >
> > Thanks!
> > Jann
> >
> >
> >
> >
> > "Jon Grieve" <jgrieve@southdown.co.uk> wrote in message
> > news:969264705.11415.0.nnrp-13.d4f0f5e4@news.demon.co.uk...
> > > Miles,
> > >
> > > You only need to configure Proxy to 'route' incoming connections if
the
> > > machine is behind the firewall.  On SBS, you don't need to do anything
> > > special.
> > >
> > > I've written up a FAQ on configuring Exchange with Demon.  You can
find
> it
> > > at my homepage (under Other FAQs), at:
> > >   http://southdown.co.uk/users/jgrieve
> > >
> > > Regards,
> > > Jon
> > >
> > >
> > >
> > >
> > >
> > >
> > > "Miles Gaynor" <mg@castlehoward.co.uk> wrote in message
> > > news:E604B4DA88E0D311B6A2009027E0197E09B56F@SBSSERVER...
> > > > Hi John,
> > > >
> > > > Yes, Exchange 5.5 but on the same machine as Proxy. (its Small
> business
> > > > Server) The IPs of the punt cluster do change, but not very often.
The
> > > > weird thing is that if Demon send a mail kick, the mail comes
through
> on
> > > > the same connection as was already present. If I had the IP of the
> > > > mailserver wrong and I would expect the mail to fail even after a
mail
> > > > kick. I don't think it can be a problem with port 25 and SMTP, there
> > > > must be something else that Demon use to ID you apart from the
> > > > Username/password as you log on.
> > > >
> > > > either that or i am totally wrong. (It has been known!)
> > > >
> > > > Miles
> > > > >-----Original Message-----
> > > > >From: Jon Grieve [mailto:jgrieve@southdown.co.uk]
> > > > >Posted At: Thursday, September 14, 2000 4:30 PM
> > > > >Posted To: nt
> > > > >Conversation: Firewall blocks email - help!
> > > > >Subject: Re: Firewall blocks email - help!
> > > > >
> > > > >
> > > > >Miles,
> > > > >
> > > > >First, I don't think you can IP addresses for the punt
> > > > >cluster, as they may
> > > > >change.  However, for testing, this should work for the interim.
> > > > >
> > > > >So, what mail server are you using?  Exchange?  Is it running
> > > > >on another
> > > > >machine 'behind' Proxy?
> > > > >
> > > > >Jon
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >"Miles Gaynor" <mg@castlehoward.co.uk> wrote in message
> > > > >news:E604B4DA88E0D311B6A2009027E0197E099060@SBSSERVER...
> > > > >> Hi Folks,
> > > > >>
> > > > >> I am trying to receive email through MS Proxy 2.0 from demon
> > > > >but when I
> > > > >> enable IP filtering I don't receive any email. I have made
several
> > > > >> filters with  port 25 as smtp and the remote host as one of
> > > > >demons mail
> > > > >> servers (I think I have covered all of demons mail server IPs)
but
> no
> > > > >> joy.
> > > > >>
> > > > >> Also, If I connect and ask Demon help to do a mail kick
> > > > >while I am still
> > > > >> connected, the mail comes in fine so it seems that demon
> > > > >don't recognise
> > > > >> me when I have dialed up. Does anyone know how this could be
> > > > >solved so
> > > > >> that I can have my firewall active but receive mail from demon?
> > > > >>
> > > > >> I did try opening the Ident port, but with no joy (but I'm
> > > > >not to clear
> > > > >> on how this one works)
> > > > >>
> > > > >> TIA
> > > > >> Miles
> > > > >>
> > > > >
> > > > >
> > > >
> > >
> > >
> >
> >
>
>