Installing Warp3

Thread View: demon.ip.support.os2

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Chris Gore Tue, 14 Dec 1999 00:00

#113

Author: Chris Gore
Date: Tue, 14 Dec 1999 00:00

10 lines
940 bytes

Hi...
Can anyone help me ?
I used to have Warp3 on my old machine but now have a new set-up. My
current machine has 2 hard drives. I want to install OS2 on the second
drive. The installation FDISK doesn't show the correct partition info
for this drive and so I cannot set a partition as "INSTALLABLE".
There is no problem on installing on the C drive and using "DUAL BOOT".
TIA
-- 
Chris Gore

Re: Installing Warp3

#114

Author: Marcus and Aviva and Rhiannon
Date: Fri, 17 Dec 1999 00:00

30 lines
1678 bytes

Hi there...

Chris Gore wrote:
> I used to have Warp3 on my old machine but now have a new set-up. My
> current machine has 2 hard drives. I want to install OS2 on the second
> drive. The installation FDISK doesn't show the correct partition info
> for this drive and so I cannot set a partition as "INSTALLABLE".
> There is no problem on installing on the C drive and using "DUAL BOOT".

Need some more info...

How large is the drive? If it is over 4gig you will need replacement
boot disks from the IBM site. It's a small patch and allows the
correct reading of larger drives.

Otherwise you have a configuration error. Is it set as a slave
drive? Is a CD drive or other interfering?

I cannot yet help.

> TIA
> --
> Chris Gore

yours, Marcus.
-- 
Marcus, Aviva and Rhiannon at the 'Appo Site'
Marcus: marcus@appo.demon.co.uk
Aviva: aviva@appo.demon.co.uk
Rhiannon: rhiannon@appo.demon.co.uk

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads