🚀 go-pugleaf

In article <yE07PDA7IOmxEwr$@soliton.demon.co.uk>
           ian@soliton.demon.co.uk "Ian Cargill" writes:

} Thank you for the reply to my earlier thread, "Problems setting up RAS".
} Actually, I went back and deleted the TCP/IP and RAS installation (as
} best I could) then re-installed from scratch. This fixed most of the
} problems.  Sadly, I forgot to delete the posting before I connected
} again some time later!!
}
}
} Anyway, I still have a problem.  When I dial, my modem connects and
} handshakes OK, but the app sits there with a message box saying
} "Verifying name and password...".  The Remote Access Monitor shows
} occasional blips in the Tx but nothing that I spotted in the Rx.  The
} Error indicator showed steady Red, which looks suspicious, but I can't
} find any references to the RAM, so I'm not sure what it means.  (Should
} I get the NT Resource Kit??)

Me thinks that we have seen this before to quote an old post


On Tue, 02 Apr 96 21:47:28 GMT, Richard Ashton
<richard@corixia.demon.co.uk> wrote:

>In article <832114952wnr@sapiens.demon.co.uk>
>           Jeff@sapiens.demon.co.uk "Jeff Green" writes:
>
>} Could somebody please put me out of my misery by pointing me to /
>} posting me a working SWITCH.INF ???
>
>Ye olde NoEcho problem me thinks
>
>
>[DEMON]
>
>COMMAND=<cr>
>ERROR_NO_CARRIER=<match>"NO CARRIER"
>
>OK=<match>"ogin:"
>LOOP=<ignore><cr><lf>
>
>COMMAND=corixia<cr>
>ERROR_NO_CARRIER=<match>"NO CARRIER"
>
>OK=<match>"assword:"
>COMMAND=xxxxxxx<cr>
>NoEcho         <------------------------- HERE be Trouble fixed
>
>OK=<match>"ol:"
>
>COMMAND=PPP,idle=0<cr>
>OK=<match><ignore>"PPP"<ignore><cr><lf>
>ERROR_NO_CARRIER=<match>"NO CARRIER"
>
>CONNECT=<match>"HELLO"
>
>OK=<ignore>
>
>ERROR_DIAGNOSTICS=<cr><lf><Diagnostics>
>ERROR_DIAGNOSTICS=<lf><cr><lf><Diagnostics>

Possibly ??

{R}