Thread View: demon.ip.support.pc
2 messages
2 total messages
Started by colin may
Mon, 12 Dec 2011 14:51
Help with KA9Q and variants.
Author: colin may
Date: Mon, 12 Dec 2011 14:51
Date: Mon, 12 Dec 2011 14:51
10 lines
1442 bytes
1442 bytes
High I am trying to change the base address of the com ports in KA9Q and its variants. The problem is I need four characters for the hex address, there is only space for three. Is there anything I can do? Any help would be appreciated. Still running DOS 6.22 and browsing with LYNX. Windows are for letting in light, not running on computers.
Re: Help with KA9Q and variants.
Author: pete
Date: Mon, 12 Dec 2011 20:21
Date: Mon, 12 Dec 2011 20:21
34 lines
2189 bytes
2189 bytes
In article <20111212.1451.258snz@cj4386.demon.co.uk>
colin@cj4386.demon.co.uk "colin may" writes:
> I am trying to change the base address of the com ports in KA9Q and
> its variants. The problem is I need four characters for the hex address, there
> is only space for three. Is there anything I can do? Any help would be
> appreciated.
Not sure I understand the problem -- are you referring to the DIS
front end to set this? It seems that you might have a somewhat
strange setup to require a 4-digit base address; the entry in my
autoexec.net is:
attach asy 0x3f8 4 ppp sl0 4096 576 115200
Can you edit this file and manually enter the address you need? It's
a while since I had to configure anything in this area but have a
vague recollection that the base addresses are
0x3f8 - com1
0x2f8 - com2
0x3e8 - com3
0x2e8 - com4
What COM port are you trying to configure?
> Still running DOS 6.22 and browsing with LYNX.
As am I ;-)
Pete
--
"We have not inherited the earth from our ancestors,
we have borrowed it from our descendants."
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads