🚀 go-pugleaf

The following is a guide to the set-up needed for Newton Internet
Enabler to be able to access a Demon Account.

1. Tap on Internet Setup. 

The first screen should show:-
        - the Setup Name - [use something like Demon UK + access point
(see 2)]
        - Link Protocol - [PPP]
        - Phone - [demon dial number ]
        - Name - [your node name - the bit after the @ but before the
'demon.co.uk' in your demon e-mail address
        - Set Password [your POP3 password]


Tap on Continue to display the second page:

        -Newton's IP Address [static, use your own IP address shown when
logging on by other means]
        - Gateway IP Address [static, 158.152.1.222]
        - Name Server IP Address [158.152.1.58]
        - Domain [demon.co.uk]

Tap on Continue to display the third page:

        - Login script [Pause 3, Wait for ogin:, Send User Name, Send
'P', Wait for assword:,Send Password, Send 'P', Wait for otocol:, Send
idle=0,PPP ,Send 'P', Wait for HELLO, Done] where 'P' = return
(backwards P or paragraph mark).
        
That's NIE set up.



2) To associate a particular setup with a pre-defined Work Site tap on
Owner Info (located in the Setup Folder). Tap on one of the listed
worksites or create a New one. If Internet Info hasn't already been
added you can select Add, Internet Info or if you want to change an
existing one tap on Show, All Info and then the Internet Info. From the
drop down list of Internet Setup(s) select the demon access point you
want to use from this worksite.

You can repeat steps 1 and 2 to map your home, work and other business
demon access points so that you need only select the worksite to
automatically dial into the right (local) one.

3) You can get Newton Internet enabler free from the World of Newton web
site at http://www.newton.apple.com and follow the link to NIE (or
internet).

I hope this helps. Let me know if you think it can be improved.
-- 
Nic Plum

nic@nplum.demon.co.uk

Buckden,
Huntingdon,
Cambs. UK