🚀 go-pugleaf

In article <848254220snz@vollans.demon.co.uk>, Stephen@vollans.demon.co.uk 
says...
>
>In article <328da977.0@muir-et2.staff.demon.net>
>           malcolm@demon.net "Malcolm Muir" writes:
>
>> Stephen M Baines (Stephen@vollans.demon.co.uk) wrote:
>> > In article <847956130snz@smof.demon.co.uk>
>> >            tim@smof.demon.co.uk "Tim Illingworth" writes:
>> > 
>> > > Setting "sm ga post.demon.co.uk" causes KA9Q 2.16d to hang (at least
>> > > here).
>> > > 
>> > > Where is the fixed version of this Demon-supported software?
>> > 
>> > Malcolm wrote to me (I had the same problem) and said that it should 
>> > work if the sm ga line comes after the nameserver definitions. That 
>> > has worked for mine.
>> 
>> Thinking about this, a better place is probably after the dialer
>> initiation, with the inline mode set.
>
>Does that mean after the "inline on" line or after the "$nodial 
>dial..." line?

I don't have an autoexec.net file to hand, but after the line that initiates 
the dialer, this prevents the smtp gateway command from being executed until 
the link is up and the nameserver available.

-- 
Malcolm S. Muir                                   Demon Internet Ltd.
Sunderland                                        322 Regents Park Road
England                                           London N3 2QQ