Help! A2000 Rom Switching

Article View: demon.tech.amiga

Article #219

#219

From: Ian Deaville
Date: Sun, 04 Jan 1998 00:00

25 lines
1449 bytes

Hi folks,

A colleague at work has lent me his A2000, so that I can get it working again.
The original problem was that the PSU had died, but during my investigation the
wires to his ROM switch fell off :>(

What I have is this;  A rev 6 motherboard, with two ROM chips piggy-backed together
at the appropriate location.  From there go four wires.  Two are joined together
at pin 10, one is linked to pin 21, the last to pin 30.  All four were then linked 
to a DPDT switch, which itself has opposite terminals of the two poles cross-linked
together.

What wires should I solder to which pins of the switch to get it working again?

All advise gratefully received!

Regards,

Ian

--
 Ian Deaville - ian@deaville.demon.co.uk

 Connecting via Demon Internet Ltd

Technical Details

Message-ID: <800.308T1251T10081379@deaville.demon.co.uk>

Path: arc1-ca.pugleaf.net!unknown!not-for-mail

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 11015b,94902530f4f1ba7a,start
X-Google-Attributes: gid11015b,public
X-Google-Thread: 1160fd,94902530f4f1ba7a,start
X-Google-Attributes: gid1160fd,public
X-Google-Thread: f7e4d,94902530f4f1ba7a,start
X-Google-Attributes: gidf7e4d,public
From: "Ian Deaville" <ian@deaville.demon.co.uk>
Subject: Help!  A2000 Rom Switching
Date: 1998/01/04
Message-ID: <800.308T1251T10081379@deaville.demon.co.uk>
X-Deja-AN: 312694694
Followup-To: ian@deaville.demon.co.uk
X-NNTP-Posting-Host: deaville.demon.co.uk [158.152.248.161]
Newsgroups: demon.tech.amiga,demon.ip.support.amiga,comp.sys.amiga.hardware