🚀 go-pugleaf

On Sat, 25 Nov 95 18:32:57 GMT, Julian Cameron wrote:
  : hello, I am trying to transfer everything on my present Hd to a new one.
  : I've got the settings to make the new drive a slave unit, but have
  : absolutely no idea or documentation for making my current drive know it's
  : got a slave. The current settings don't work as the drive just hangs. The
  : drive is a Connors CP30084E, it appears to have 3 sets of jumpers. One is
  : underneath near the drive spindle & the other 2 are at the back, one is in
  : small plastic shed *, the other is a row of about 8 jumpers none of which
  : in use. I've tried them all but have not found the correct combo, anyone
  : idea ?
  :
  : * sorry not very clear here. it is not in use, but has a small plastic cov
  : seperating it from the rest of the jumpers


According to the settings from EZ-DRIVE they are:-

DRIVE CONFIGURATION	CP30084E
	
Selection                               Jumper C/D     Jumper CAM
Single drive only or CAM master           closed         closed
Master drive in a two drive ISA system    closed          open
Slave drive in a two drive CAM system      open          closed
Slave drive in a two drive ISA system      open           open

NB. The CAM jumper is not present on all PCB Revisions

Hope this helps, Rod

--
  \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
   \\\   Rod Crookes  -  rodders@rvac.demon.co.uk     \\\
    \\\   Grimsby U.K.    rodcrux@cix.compulink.co.uk  \\\
     \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
	
    	'Only statues need to be patient . . . .