🚀 go-pugleaf

>I'm looking for a suitable Multisync Monitor for use with my A1200, 
>and would like to know if there are any available other than the 
>Micovitec 1438 or Amiga clone.
There are *loads*...

>Also, I would prefer a screen size of 15" (17" would be better).
In that case go for an IDEK Iiyama (try saying that one! ;-) Vision Master 17".
There are a few different models about:
MF-8617  - scans down to 23kHz (ie. no PAL, NTSC modes)
MF-8617a - scans down to 27kHz (ie. no PAL, NTSC, default-Super72 modes)
MF-5017a - scans down to 15kHz (ie all Amiga modes) (you need to get this one
directly from Iiyama)

>Has anyone any experiance of using other monitors ?
Yes, me. I went  for  the  MF-8617,  since  I  don't  play  too  much  and  most
applications  can  change  their  screen mode. I could always buy a scan-doubler
which ups the PAL and NTSC frequencies, so I could then use those, too.

>If so, do they work with all Amiga modes ?
It depends on the monitor. You can use ANY monitor. But for PAL or NTSC you need
to make sure that the vertical frequency syncs down to 15kHz (this usually rules
out quite a few already).

>Is an adaptor or special lead required ?
Yes. If you have an Amiga 4000 you already have the adaptor. Otherwise, you  can
buy or order them in any Amiga hardware store...

>Where can it be obtained, and what price ?
DABS Direct offer the best prices all round on 0800-558866. Price is around  500
pounds.  I  think  you should buy a copy of ComputerShopper and do some reading,
then buy the goods on VISA, ACCESS or SWITCH. Most credit cards  ensure  you  if
the goods are faulty or damaged or lost or...

>Is it posible to switch between 2 monitors with the Amiga on without 
>causing any damage ?
Yesno. You should not do it since it can cause damage, but you  might  be  lucky
and get away with it. Like (un)plugging your mouse, printer or modem really.

hope this helps a bit,

 Michael



--
Michael A.F. Wiedmer (The golden rule: He who has the gold, makes the rules!)