🚀 go-pugleaf

Steve Firth <filter@firthcom.demon.co.uk> wrote:

> Bridge <bridgeband@bluewin.ch> wrote:
> 
> > My question:
> > What cable would be protected by the noise? Would a coaxial cable do?
> 
> This may sound silly, but what cable are you using at the moment? All
> audio cables should be screened. Also what are you connecting to what?
> The input on the G3 should be conected to a line level output from your
> setup (i.e. tape out). Or are you talking about connecting the G3
> headphone out to an input on your HiFi?

I'm using, I don't know the name but I'll describe, a simple audio
cable, which has one end that plugs into the input of the G3 (where the
little loudspeaker is drawn). I've bought a special microphone for
PowerMacs which has an extended end, which isn't the case here. From
this end to the other, there are two leads stuck together and dividing
into a white plug and a red plug. These two plug go into the HiFi to my
DAT Playback socket (which is meant for that, I think). When I have the
time I'll snip the earth of the audio cable, I hope it's obvious which
one it is.
Thanx for all your advice. Keep it up!

Timothy Bridge