🚀 go-pugleaf

In article <B166BA09966833DDD@0.0.0.0>, the moving finger of 
terry@edgy.demon.co.uk wrote...

>The monitor in question is an IKEGAMI C/T-20HA REV C dated 1990. It has a
>normal 2-row 15-pin Mac cable on it (which would need to be changed to a
>3-row) but I don't think that's the problem -- he's been told that it may
>not synch.

Odd, according to the monitor database at Griffin 
(http://www.nashville.net/~griffin/monitors/Ikega08.html) it is a fixed 
frequency trinitron with 5-BNC connectors. 

They reckon it will need a Macsynch connector, but this may depend on your 
motherboard. I needed one to run a 5-BNC workstatiopn monitor from my 4400 
as the on-board video doesn't do composite synch above 640x480. This may 
not be a problem in your case as apparently the monitor has a synch 
selector switch. 

In any case, you _will_ be able to amke it work, but it might cost you a 
�20 adapter. 


-- 
ap