Modem INIT String

Thread View: demon.tech.mac

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Tom Cutting Sun, 22 Feb 1998 00:00

#1575

Author: Tom Cutting
Date: Sun, 22 Feb 1998 00:00

22 lines
1145 bytes

Hi all

I have just re signed up with Demon again after a long time away and am
using a US Robotics Mac&Fax 28.800 Modem, which keeps bombing out at every
possible momment :(

Also When you try logging back on the modem seems to lock up as when you
get to the bit where it should log on it just keeps looping round, and then
you have to shutdown the machine and modem and leave it for some time
before you can use it again.

I seem to remember that Last time this happened It was remedied by a init
string. I have spend all day today trying to get hold of Demon Tech Supp
but to no avail, double >:-(

Dose anybody  know this bit of info or do I keep listening to that engaged
tone.

TIA

Tom

Re: Modem INIT String

#1687

Author: Tom Cutting
Date: Sun, 01 Mar 1998 00:00

19 lines
1075 bytes

In article <1d4utxx.1id5b0jkrvtiuN@lunedale.demon.co.uk>,
cb@lunedale.demon.co.uk (Chris Bennett) wrote:

>I've only ever used a Mac&Fax 28800 with Demon. Used to just use AT&F
>but now use the following just to make sure everything's OK:
>
>AT&FE0&D0&H1&R2&B1Q0X4&A3M1&G2&K3&S1S7=75S12=25
>
>Try it if you like, but I'm not sure it'll solve your problems.
>
>Chris.
>
Thanks for the info Chris

I have tried copy/pasting into freePPP 2.5 and get an 'too long, must be
between 1 and 42 Chars' could there be a typo in this

TIA

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads