🚀 go-pugleaf

I'm sorry if I missed the early part of this thread where the problem
may have been detailed, but I use a MT2834ZDX (external version) with no
problems whatsoever (COM1).

However I did have a Multitech 2834 PCMCIA (LT I think) which although
made a solid connection each time, dropped to 0cps fter about 30 seconds
and refused to move.

If you need anything with regard to the 2834ZDX (I have the fully
downloaded manual from Multitech BBS not the pocket version that comes
with the modem), I'll be glad to try and help.

Phil March 
In article <32eae548.1383053@news.demon.co.uk>, Stuart Booth
<stuart@garage.demon.co.uk> writes
>Mick <mick@imagist.demon.co.uk> wrote:
>
>>I've had an ongoing serious problem with connecting to Demon Ascend
>>modems with my Multitech MT2834 ZDX which doesn't seem to be solvable.
>>
>>I had to dial in a ridiculous 19 times last night to get a working
>>connection to Demon. It only works if I get a 28,800 LAPM Compressed
>>connection. A 26,400 LAPM Compressed connection will not work.
>
>If it's any consolation, my 2834ZDX typically only connects at 26400.
>Usually it stays connected. Recently I've been hitting finch-134/133
>and I get 28k connections, which inevitably drop after a few minutes
>(whilst data is transferring I hasten to add).
>
>If I hit finch-200 or so I just don't even bother going to get news
>because I expect a dropped connection at whatever speed I get.
>
>I used to get solid 28k connections right up until October last year
>when numbers and stuff changed. HoHum.
>
>Stuart

-- 
Phil March