🚀 go-pugleaf

In article <828891027snz@lgab.demon.co.uk>, leo <leo@lgab.demon.co.uk>
writes
>In article <6NjdJOA96bZxEwCm@clens.u-net.com>
>           clive@clens.u-net.com "Clive Kay" writes:
>
>> >> mine just says dx2s and dxs.
>> >
>> >In which case it's not certain it'll work but you'll probably get lucky.
>> >
>> >Might be worth looking at the 3 volt AMD 5133 chip too.
>> >
>> >
>> >J/.
>> It sounds like your M/B is rather old and therefore is probably only 5
>> Volts . If you want to upgrade the a DX4*100 it will work but get the
>> Intel OD (5 Volt) or a 3.3 dx100 and a voltage dropper which fits in
>> between the chip and the socket. Set the mb up for the DX2.
>
>
>If you have a source for the voltage dropper - I've had no luck so far 
>
Watford Electronics have the adapter or had...
-- 
Clive Kay