🚀 go-pugleaf

Robin,

I expect you are trying too hard, just like I did.

I'm using an Asus ISDNLink 128 (but only one channel at the moment) on
SuSE 6.3 with I4L.

After lots of aggravation I contacted Werner Cornelius
(werner@isdn4linux.de).

He replied that Asuscom PCI cards are either type=35 (HFC-PCI) or
type=36 (Winbond).  You must not specify IRQ, I/O etc: just let the
system use auto-detection.

Karsten Keil at SuSE responded that the Asuscom driver is only for ISA
cards: for PCI cards use either HFC-S PCI for type 35, or W6692 for type
36.

The following info comes from Yast, the SuSE set-up tool, on my working
system:

Start I4L	 	[X]   (That means yes)

ISDN protocol		[Euro-isdn (EDSS1)]

Type of isdn card	[HFC 2BDSO PCI]

Card identification	:HiSax   :

Everything else is left blank: IRQ, I/O, Mem Base Add etc.

Hope this helps.

Andrew

andrew@brilyant.demon.co.uk

p.s.  Do you know anything about SCSI scanners & Adaptec cards?  That's
my current bugbear. 


Robin wrote:
> 
> Hi ...
> 
> Its busy on here again isn;t it ;)
>SNIP
>....... 
> robin