🚀 go-pugleaf

From: "Roy Engehausen" <ENGE@IBM.COM>
Date: Mon, 10 Jun 91 17:10:52 PDT
Subject: DES

I have a very old copy of the DES code from NET.  Is there something
newer that will compile with Turbo "C++" or something like that?

Roy


----
From: 
Date: 
Subject: 

X400-Received: by mta chx400.switch.ch in /PRMD=switch/ADMD=arcom/C=CH/;
               Relayed; Tue, 11 Jun 1991 12:10:23 +0200
X400-Received: by /ADMD=ARCOM/C=CH/; Relayed; Tue, 11 Jun 1991 12:07:16 +0200
X400-Received: by /PRMD=ALCATEL/ADMD=ARCOM/C=CH/; Relayed;
               Tue, 11 Jun 1991 13:09:10 +0200
Date: Tue, 11 Jun 1991 12:07:16 +0200
X400-Originator: MARCO.ZOLLINGER@TAP.TELEMATIK-NETZE.ALCATEL.arcom.ch
X400-Mts-Identifier: [/PRMD=ALCATEL/ADMD=ARCOM/C=CH/;65802111601991/17030@RALPH]
X400-Content-Type: P2-1984 (2)
Content-Identifier: RR pa0gri vers
From: MARCO.ZOLLINGER@TAP.TELEMATIK-NETZE.ALCATEL.arcom.ch
Message-Id: <"01902111601991/44487 X400GW*"@MHS>
To: wb0mpq@ka9q.bellcore.com, tcp-group@ucsd.edu
Subject: <RR> pa0gri version

Hi Al,

I've had some trouble reaching you, the X.400 to internet gateway sometimes goes crazy, as well
as NOS at hb9zz.

As you proposed, I installed the latest PA0GRI version at hb9zz. It seemed to be working fine,
but after some time we noticed many features weren't working as they did before; the same has
been reported by Antonio AH6BW. He stepped then back to g1emm 1.6. I guess we'll do the same 
until the problems with Gerard's version will be fixed.

The concrete problems were :
- param command not working properly (see report in the group)
- it's much slower; ftp tranfers to our Ultrix machine via ethernet fell down to 8Kbytes/sec
  instead of the 40-50 we had before
- weird behaviour of smtp causing deadlocks
- memory hungry; although I recompiled it all excluding PPP,nntp,dialer etc. , the watchdog
  resets the system every 4-5 Hours. I once saw the stat command reporting more than 3000
  red and 1500 yellow garbage collections (!) 5 minutes after booting.
- The system often crashes because of incoming telnet sessions on the ethernet port with
  'wrong' echo settings.
- mbox gateway problem (see report in the group)

The encap code seems to be working, at least looking at the ethernet trace; my attempts to 
ping,finger, and telnet you were instead unsuccessful.

                                      73,

Marco
HB9CAT


----
-- 
*****************************************************************
   ___  ____  ___    _  _ ___ ___   ___ ___ ___     ___ _  _
  /__/ / / /   /    /\ / /__   /   /__//__//   /__//__ /\ /
 / \  /   / __/_   /  / /__   /   /  //  //__ /  //__ /  /