Followup Adding a second disk etc ...

Thread View: fj.mail-lists.apollo

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Antoon Frehe Thu, 21 Jan 1993 13:21

#915

Author: Antoon Frehe
Date: Thu, 21 Jan 1993 13:21

28 lines
1901 bytes

Hi,

Thanks for all the replies. i must admit, i'd seen this jumper program
somewhere before, but now i just hadn't thought of it.

I haven't tried everything yet, but people are starting to complain the
Apollo is too often of the air because i'm busy playing with it's disks.
There's a few strange things. When i use the jumper program, the layout of
the WD7000 board doesn't look a bit like the my WD7000V-ASE (to be exact).
Also David Krowitz says the WD7000 has 3 connectors. Mine has 4.
2 34 pin connectors and 2 20 pin connectors. Is it so that i have to
chain the cables from one disk to the other or cab or must i use 
seperate cables from the controller to the disks?

Most disturbing however is a line from the jumper program when i look
at the Micropolis 155 Mb drive. It reads..

155 Mb Drives are Not Supported for Multiple Disk Configuration.

Greetings Antoon.

-- 
---------------------------------------------------------------------------
 Antoon Frehe                           E-mail antoon@dutentb.et.tudelft.nl
 University of Technology Delft                a.frehe@et.tudelft.nl
 Mekelweg 4, 2628 CD  Delft
 The Netherlands, Earth                 phone  015 781796
---------------------------------------------------------------------------

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads