Thread View: gnu.bash.bug
1 messages
1 total messages
Started by Jonathan Bayer
Mon, 28 Aug 1989 21:51
patches for SCO Xenix 386
Author: Jonathan Bayer
Date: Mon, 28 Aug 1989 21:51
Date: Mon, 28 Aug 1989 21:51
271 lines
9366 bytes
9366 bytes
The following are the relatively minor changes to bash necessary
to make it compile under SCO Xenix 2.3.2 using the 2.3 development system.
Please note that I reported a bug regarding a control-d in a seperate
message. That patch is also included in this set of patches (parse.y)
JB
*** /usr/news/sources/gnu/bash/src/bash-1.02/Makefile Sat Jul 1 22:12:29 1989
--- Makefile Mon Aug 28 11:14:08 1989
***************
*** 18,25 ****
# Here is a rule for making .o files from .c files that doesn't force
# the type of the machine (like -sun3) into the flags.
! %.o : %.c
! $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
# Of course, you cannot do this the first time through...
#SHELL=/usr/gnu/bin/bash
--- 18,25 ----
# Here is a rule for making .o files from .c files that doesn't force
# the type of the machine (like -sun3) into the flags.
! #%.o : %.c
! # $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
# Of course, you cannot do this the first time through...
#SHELL=/usr/gnu/bin/bash
***************
*** 33,39 ****
#
# The mailing address of you, the local maintainer. This *must* be
# enclosed in double quotes. Until I make a better Makefile.
! MAINTAINER = '"bfox@ai.mit.edu"'
# Destination installation directory. The shell is copied here if
# you do a `make install'. The directory name does NOT end in a slash.
--- 33,39 ----
#
# The mailing address of you, the local maintainer. This *must* be
# enclosed in double quotes. Until I make a better Makefile.
! MAINTAINER = '"jbayer@ispi.COM"'
# Destination installation directory. The shell is copied here if
# you do a `make install'. The directory name does NOT end in a slash.
***************
*** 44,55 ****
# try one and see how well you do.
# Use i386 for PC type 386 boxes. (Compaq, etc.)
# SUN3, SUN4, SUN386i, VAX, SONY, CONVEX, HP, HP9KS300, i386, NeXT
! TARGET = SUN3
# The name of the target operating system. There isn't such a big
# difference between SUNOS3 and Bsd. But there might be in the future.
# SUNOS3, SUNOS4, SYSV, Bsd, HPUX, UNIXPC
! OS = SUNOS4
# You only need this if you are hacking the shell in a location
# that doesn't do enough backups, or does a poor job. In that
--- 44,55 ----
# try one and see how well you do.
# Use i386 for PC type 386 boxes. (Compaq, etc.)
# SUN3, SUN4, SUN386i, VAX, SONY, CONVEX, HP, HP9KS300, i386, NeXT
! TARGET = i386
# The name of the target operating system. There isn't such a big
# difference between SUNOS3 and Bsd. But there might be in the future.
# SUNOS3, SUNOS4, SYSV, Bsd, HPUX, UNIXPC
! OS = SYSV
# You only need this if you are hacking the shell in a location
# that doesn't do enough backups, or does a poor job. In that
***************
*** 71,87 ****
# HP-UX compilation requires the BSD library.
#LOCAL_LIBS = -lBSD
! GCC_SUNOS4_FLAG = -Bstatic
! DEBUG_FLAGS = $(PROFILE_FLAGS) -g $(GCC_SUNOS4_FLAG)
! LDFLAGS = $(DEBUG_FLAGS)
! CFLAGS = $(DEBUG_FLAGS) -D${TARGET} -DTARGET=${TARGET} -D${OS}
! CPPFLAGS= -I$(LIBSRC)
# If you don't have Bison use "yacc". Otherwise use "bison -y".
! BISON = bison -y
# If you don't have Gcc use cc.
! CC = gcc -traditional
####################################################################
--- 71,88 ----
# HP-UX compilation requires the BSD library.
#LOCAL_LIBS = -lBSD
! #GCC_SUNOS4_FLAG = -Bstatic
! #DEBUG_FLAGS = $(PROFILE_FLAGS) -g $(GCC_SUNOS4_FLAG)
! DEBUG_FLAGS = $(PROFILE_FLAGS)
! LDFLAGS = $(DEBUG_FLAGS) -ltcap -ltermlib -ldir
! CFLAGS = $(DEBUG_FLAGS) -D${TARGET} -DTARGET=${TARGET} -D${OS} -I$(LIBSRC)
! #CPPFLAGS= -I$(LIBSRC)
# If you don't have Bison use "yacc". Otherwise use "bison -y".
! BISON = yacc
# If you don't have Gcc use cc.
! CC = cc
####################################################################
***************
*** 109,115 ****
MALLOC = $(ALLOC_SOURCE)malloc.o
MALLOC_FLAGS = -Drcheck -Dbotch=programming_error
#MALLOC= $(ALLOC_SOURCE)malloc.o
! #ALLOCA= $(ALLOC_SOURCE)alloca.o
ALLOC_HEADERS = $(ALLOC_SOURCE)getpagesize.h
ALLOC_FILES = $(ALLOC_SOURCE)malloc.c $(ALLOC_SOURCE)alloca.c\
--- 110,116 ----
MALLOC = $(ALLOC_SOURCE)malloc.o
MALLOC_FLAGS = -Drcheck -Dbotch=programming_error
#MALLOC= $(ALLOC_SOURCE)malloc.o
! ALLOCA= $(ALLOC_SOURCE)alloca.o
ALLOC_HEADERS = $(ALLOC_SOURCE)getpagesize.h
ALLOC_FILES = $(ALLOC_SOURCE)malloc.c $(ALLOC_SOURCE)alloca.c\
***************
*** 140,146 ****
LIBRARY_TAR = $(LIBRARY_SOURCE) $(LIBSRC)Makefile $(LIBSRC)ChangeLog
# The order is important. Most dependent first.
! LIBRARIES = $(READLINE) $(HISTORY) $(TERMCAP)
CSOURCES = shell.c parse.y general.c make_cmd.c print_cmd.c\
dispose_cmd.c execute_cmd.c variables.c builtins.c\
--- 141,148 ----
LIBRARY_TAR = $(LIBRARY_SOURCE) $(LIBSRC)Makefile $(LIBSRC)ChangeLog
# The order is important. Most dependent first.
! #LIBRARIES = $(READLINE) $(HISTORY) $(TERMCAP)
! LIBRARIES = $(READLINE) $(HISTORY)
CSOURCES = shell.c parse.y general.c make_cmd.c print_cmd.c\
dispose_cmd.c execute_cmd.c variables.c builtins.c\
*** /usr/news/sources/gnu/bash/src/bash-1.02/config.h Mon Jun 26 21:45:35 1989
--- config.h Mon Aug 28 10:41:44 1989
***************
*** 48,54 ****
/* The default value of the PATH variable. */
#define DEFAULT_PATH_VALUE \
! ":/usr/gnu/bin:/usr/local/bin:/usr/ucb:/bin:/etc:/usr/etc"
/* Define V9_ECHO if you want to give the echo builtin backslash-escape
interpretation, in the style of the Bell Labs 9th Edition version of
--- 48,54 ----
/* The default value of the PATH variable. */
#define DEFAULT_PATH_VALUE \
! ":/usr/gnu/bin:/usr/local/bin:/bin:/usr/bin"
/* Define V9_ECHO if you want to give the echo builtin backslash-escape
interpretation, in the style of the Bell Labs 9th Edition version of
*** /usr/news/sources/gnu/bash/src/bash-1.02/parse.y Sat Jul 1 21:42:28 1989
--- parse.y Mon Aug 28 17:09:59 1989
***************
*** 430,439 ****
current_readline_line = readline (current_readline_prompt);
current_readline_line_index = 0;
! current_readline_line =
! (char *)xrealloc (current_readline_line,
! 2 + strlen (current_readline_line));
! strcat (current_readline_line, "\n");
}
if (!current_readline_line[current_readline_line_index])
--- 430,447 ----
current_readline_line = readline (current_readline_prompt);
current_readline_line_index = 0;
!
! if (current_readline_line == (char *)EOF) {
! current_readline_line = (char *)xmalloc(2);
! strcpy(" ",current_readline_line);
! current_readline_line[0] = EOF;
! } else {
!
! current_readline_line =
! (char *)xrealloc (current_readline_line,
! 2 + strlen (current_readline_line));
! strcat (current_readline_line, "\n");
! }
}
if (!current_readline_line[current_readline_line_index])
*** /usr/news/sources/gnu/bash/src/bash-1.02/shell.c Sat Jul 1 14:33:04 1989
--- shell.c Mon Aug 28 10:47:45 1989
***************
*** 301,307 ****
else
{
interactive = 0;
! #ifndef JOB_CONTROL
job_control = 0;
#endif
}
--- 301,308 ----
else
{
interactive = 0;
! #ifndef NOJOBS
! /* #ifndef JOB_CONTROL */
job_control = 0;
#endif
}
*** /usr/news/sources/gnu/bash/src/bash-1.02/trap.c Fri Jun 23 00:42:17 1989
--- trap.c Mon Aug 28 11:22:04 1989
***************
*** 42,51 ****
--- 42,55 ----
"SIGILL", /* illegal instruction (not reset when caught) */
"SIGTRAP", /* trace trap (not reset when caught) */
#ifdef SYSV
+ #ifndef M_XENIX
"SIGABRT",
#else
"SIGIOT", /* IOT instruction */
#endif
+ #else
+ "SIGIOT", /* IOT instruction */
+ #endif
"SIGEMT", /* EMT instruction */
"SIGFPE", /* floating point exception */
"SIGKILL", /* kill (cannot be caught or ignored) */
***************
*** 60,68 ****
--- 64,74 ----
"SIGUSR2",
"SIGCLD",
"SIGPWR",
+ #ifndef M_XENIX
"SIGJUNK1",
"SIGJUNK2",
"SIGPOLL"
+ #endif
#else
"SIGURG", /* urgent condition on IO channel */
"SIGSTOP", /* sendable stop signal not from tty */
*** /usr/news/sources/gnu/bash/src/bash-1.02/variables.c Tue Jun 27 16:40:42 1989
--- variables.c Mon Aug 28 10:52:37 1989
***************
*** 27,33 ****
--- 27,35 ----
#include "version.h"
#ifdef SYSV
+ #ifndef M_XENIX
struct pwd *getpwuid (), *getpwent ();
+ #endif
#endif
/* The list of shell variables that the user has created, or that came from
--
Jonathan Bayer Intelligent Software Products, Inc.
(201) 245-5922 500 Oakwood Ave.
jbayer@ispi.COM Roselle Park, NJ 07204
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads