Thread View: gnu.bash.bug
1 messages
1 total messages
Started by James Clark
Tue, 13 Jun 1989 17:35
bash 0.99 on 386/ix
Author: James Clark
Date: Tue, 13 Jun 1989 17:35
Date: Tue, 13 Jun 1989 17:35
322 lines
10438 bytes
10438 bytes
I had to make a few changes to get bash 0.99 to compile and run on a
386 PC running 386/ix 2.0.1 (a derivative of System V/386 3.2). I was
compiling with cc rather than gcc.
I renamed malloc-rcheck.c to malloc-check.c and unwind_protect.c to
unwind_prot.c. I had to comment out the hostname completion stuff.
diff -rc2H dist-bash/Makefile bash/Makefile
*** dist-bash/Makefile Thu Jun 1 15:22:11 1989
--- bash/Makefile Tue Jun 13 14:22:33 1989
***************
*** 28,36 ****
# The mailing address of you, the local maintainer. This *must* be
# enclosed in double quotes. Until I make a better Makefile.
! MAINTAINER = '"bfox@ai.mit.edu"'
# Destination installation directory. The shell is copied here if
# you do a `make install'. The directory name does NOT end in a slash.
! DESTDIR = /usr/gnu/bin
# The name of the target hardware. It makes a difference. If your
--- 28,36 ----
# The mailing address of you, the local maintainer. This *must* be
# enclosed in double quotes. Until I make a better Makefile.
! MAINTAINER = '"jjc@jclark.uucp"'
# Destination installation directory. The shell is copied here if
# you do a `make install'. The directory name does NOT end in a slash.
! DESTDIR = /usr/local/bin
# The name of the target hardware. It makes a difference. If your
***************
*** 43,47 ****
# difference between SUNOS3 and Bsd. But there might be in the future.
# SUNOS3, SUNOS4, SYSV, Bsd, HPUX
! OS = SUNOS4
# You only need this if you are hacking the shell in a location
--- 43,47 ----
# difference between SUNOS3 and Bsd. But there might be in the future.
# SUNOS3, SUNOS4, SYSV, Bsd, HPUX
! OS = SYSV
# You only need this if you are hacking the shell in a location
***************
*** 63,69 ****
# HP-UX compilation requires the BSD library.
! #LOCAL_LIBS = -lBSD
! GCC_SUNOS4_FLAG = -Bstatic
DEBUG_FLAGS = $(PROFILE_FLAGS) -g $(GCC_SUNOS4_FLAG)
LDFLAGS = $(DEBUG_FLAGS)
--- 63,69 ----
# HP-UX compilation requires the BSD library.
! LOCAL_LIBS = -lPW
! GCC_SUNOS4_FLAG =
DEBUG_FLAGS = $(PROFILE_FLAGS) -g $(GCC_SUNOS4_FLAG)
LDFLAGS = $(DEBUG_FLAGS)
***************
*** 77,85 ****
# If you don't have Gcc use cc.
! GCC = gcc
# Make TRADITIONAL be `-traditional' if you are using Gcc 1.2x
# or greater.
! TRADITIONAL = -traditional
#
####################################################################
--- 77,85 ----
# If you don't have Gcc use cc.
! GCC = cc
# Make TRADITIONAL be `-traditional' if you are using Gcc 1.2x
# or greater.
! TRADITIONAL =
#
####################################################################
***************
*** 110,114 ****
# Our malloc. Use alloc-files/malloc-rcheck.o for debugging, or
# alloc-files/malloc.o if not.
! MALLOC = $(ALLOC_SOURCE)malloc-rcheck.o
#MALLOC= $(ALLOC_SOURCE)malloc.o
#ALLOCA= $(ALLOC_SOURCE)alloca.o
--- 110,114 ----
# Our malloc. Use alloc-files/malloc-rcheck.o for debugging, or
# alloc-files/malloc.o if not.
! MALLOC = $(ALLOC_SOURCE)malloc-check.o
#MALLOC= $(ALLOC_SOURCE)malloc.o
#ALLOCA= $(ALLOC_SOURCE)alloca.o
***************
*** 116,120 ****
ALLOC_HEADERS = $(ALLOC_SOURCE)getpagesize.h
ALLOC_FILES = $(ALLOC_SOURCE)malloc.c $(ALLOC_SOURCE)alloca.c\
! $(ALLOC_SOURCE)i386-alloca.s $(ALLOC_SOURCE)malloc-rcheck.c
CSOURCES = shell.c parse.y general.c make_cmd.c print_cmd.c\
--- 116,120 ----
ALLOC_HEADERS = $(ALLOC_SOURCE)getpagesize.h
ALLOC_FILES = $(ALLOC_SOURCE)malloc.c $(ALLOC_SOURCE)alloca.c\
! $(ALLOC_SOURCE)i386-alloca.s $(ALLOC_SOURCE)malloc-check.c
CSOURCES = shell.c parse.y general.c make_cmd.c print_cmd.c\
***************
*** 123,127 ****
test.c readline.c trap.c history.c jobs.c nojobs.c $(ALLOC_FILES)\
keymaps.c emacs_keymap.c vi_keymap.c funmap.c braces.c\
! unwind_protect.c
HSOURCES = history.h shell.h flags.h trap.h hash.h jobs.h readline.h\
--- 123,127 ----
test.c readline.c trap.c history.c jobs.c nojobs.c $(ALLOC_FILES)\
keymaps.c emacs_keymap.c vi_keymap.c funmap.c braces.c\
! unwind_prot.c
HSOURCES = history.h shell.h flags.h trap.h hash.h jobs.h readline.h\
***************
*** 135,139 ****
flags.o jobs.o subst.o glob.o hash.o mailcheck.o test.o\
readline.o trap.o history.o alias.o $(MALLOC) $(ALLOCA)\
! braces.o unwind_protect.o
# Documentation for the shell.
--- 135,139 ----
flags.o jobs.o subst.o glob.o hash.o mailcheck.o test.o\
readline.o trap.o history.o alias.o $(MALLOC) $(ALLOCA)\
! braces.o unwind_prot.o
# Documentation for the shell.
Only in bash/alloc-files: malloc-check.c
Only in dist-bash/alloc-files: malloc-rcheck.
diff -rc2H dist-bash/builtins.c bash/builtins.c
*** dist-bash/builtins.c Sat Jun 3 18:32:24 1989
--- bash/builtins.c Tue Jun 13 15:06:54 1989
***************
*** 10,14 ****
--- 10,16 ----
#include <sys/param.h>
#include <sys/time.h>
+ #ifndef SYSV
#include <sys/resource.h>
+ #endif
#include <sys/types.h>
#include <sys/stat.h>
***************
*** 361,371 ****
{ "type", type_builtin, 1, "type [-type | -path] [name ...]",
" For each NAME, indicate how it would be interpreted if used as a\n\
! command name.
!
If the -type flag is used, returns a single word which is one of\n\
`alias', `function', `builtin', `file' or `', if NAME is an\n\
alias, shell function, shell builtin, disk file, or unfound,\n\
! respectively.
!
If the -path flag is used, either returns the name of the disk file\n\
that would be exec'ed, or nothing if -type wouldn't return `file'" },
--- 363,373 ----
{ "type", type_builtin, 1, "type [-type | -path] [name ...]",
" For each NAME, indicate how it would be interpreted if used as a\n\
! command name.\n\
! \n\
If the -type flag is used, returns a single word which is one of\n\
`alias', `function', `builtin', `file' or `', if NAME is an\n\
alias, shell function, shell builtin, disk file, or unfound,\n\
! respectively.\n\
! \n\
If the -path flag is used, either returns the name of the disk file\n\
that would be exec'ed, or nothing if -type wouldn't return `file'" },
***************
*** 2352,2357 ****
long newlim;
{
struct rlimit limit;
!
switch (which)
{
--- 2354,2360 ----
long newlim;
{
+ #ifndef SYSV
struct rlimit limit;
! #endif
switch (which)
{
***************
*** 2361,2365 ****
{
#ifdef SYSV
! return (ulimit (1, limit.rlim_max));
#else
if (getrlimit (RLIMIT_FSIZE, &limit) != 0 )
--- 2364,2368 ----
{
#ifdef SYSV
! return (ulimit (1, 0L));
#else
if (getrlimit (RLIMIT_FSIZE, &limit) != 0 )
diff -rc2H dist-bash/general.c bash/general.c
*** dist-bash/general.c Thu May 25 01:16:07 1989
--- bash/general.c Tue Jun 13 14:36:39 1989
***************
*** 341,345 ****
extern int errno;
#include <sys/errno.h>
!
bcopy(s,d,n) char *d,*s; { while(n--) *d++ = *s++; }
char *getwd(s) char *s; { getcwd(s,MAXPATHLEN); return s; }
--- 341,346 ----
extern int errno;
#include <sys/errno.h>
! #undef index
! #undef rindex
bcopy(s,d,n) char *d,*s; { while(n--) *d++ = *s++; }
char *getwd(s) char *s; { getcwd(s,MAXPATHLEN); return s; }
diff -rc2H dist-bash/jobs.h bash/jobs.h
*** dist-bash/jobs.h Sun May 21 16:04:27 1989
--- bash/jobs.h Tue Jun 13 14:55:49 1989
***************
*** 7,11 ****
#ifdef i386
! union wait { struct { char high; char low; } bytes; short word; };
#define WSTOPPED 0177
#define w_status word
--- 7,11 ----
#ifdef i386
! union wait { struct { char low; char high; } bytes; short word; };
#define WSTOPPED 0177
#define w_status word
diff -rc2H dist-bash/readline.c bash/readline.c
*** dist-bash/readline.c Tue Jun 6 23:31:12 1989
--- bash/readline.c Tue Jun 13 14:18:20 1989
***************
*** 236,239 ****
--- 236,240 ----
struct sigcontext *scp;
{
+ extern char *get_string_value ();
if (readline_echoing_p)
{
***************
*** 926,929 ****
--- 927,932 ----
register char *ofd, *ols, *oe, *nfd, *nls, *ne;
int i, lendiff, wsatend;
+ static void move_cursor_relative ();
+ static void output_some_chars ();
/* Find first difference. */
***************
*** 2314,2318 ****
/* Another one. Why not? If the word starts in '@', then look through
the world of known hostnames for completion first. */
!
if (*text == '@')
{
--- 2317,2321 ----
/* Another one. Why not? If the word starts in '@', then look through
the world of known hostnames for completion first. */
! #if 0
if (*text == '@')
{
***************
*** 2326,2330 ****
}
}
!
/* And last, (but not least) if this word is in a command position, then
complete over possible command names, including aliases, functions,
--- 2329,2333 ----
}
}
! #endif
/* And last, (but not least) if this word is in a command position, then
complete over possible command names, including aliases, functions,
***************
*** 2778,2781 ****
--- 2781,2785 ----
}
+ #if 0
/* How about a completion function for hostnames? */
#include <sys/socket.h>
***************
*** 2815,2818 ****
--- 2819,2823 ----
}
}
+ #endif
#endif /* SHELL */
diff -rc2H dist-bash/shell.c bash/shell.c
*** dist-bash/shell.c Thu May 25 16:02:02 1989
--- bash/shell.c Tue Jun 13 14:29:30 1989
***************
*** 733,737 ****
SIGXFSZ,
#endif
! SIGVTALRM, SIGPROF,
#ifdef SIGLOST
SIGLOST,
--- 733,742 ----
SIGXFSZ,
#endif
! #ifdef SIGVTALRM
! SIGVTALRM,
! #endif
! #ifdef SIGPROF
! SIGPROF,
! #endif
#ifdef SIGLOST
SIGLOST,
James Clark
jjc@jclark.uucp
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads