🚀 go-pugleaf

Hardware: Motorola SYS1147 ('030 @ 20 MHz, 8 M ram, ethernet etc.)
OS: Motorola System V / 68 (SVR3V6 [corresponds to AT&T SVR3.0 {?}])
NOTE: This 'feature' does NOT appear on SVR3V5.[01]

Emacs-version: 18.55 (usg-unix-v)
.emacs - file : none
site-init.el : none

Symptoms:

	$ emacs
	[... emacs starts as usual ...]
	^G
	[ at bottom line: Quit ]
	^G
	Fatal error (1)
	[... line HANGS UP ...]

This has been tested on both telnet connection and on direct serial line.

Symptoms are all the same either I use alloca.c or alloca.s (my own version)

contents of the config.h - file :
---- clip ---- clip ---- clip ----
/* GNU Emacs site configuration template file.
   Copyright (C) 1988 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY.  No author or distributor
accepts responsibility to anyone for the consequences of using it
or for whether it serves any particular purpose or works at all,
unless he says so in writing.  Refer to the GNU Emacs General Public
License for full details.

Everyone is granted permission to copy, modify and redistribute
GNU Emacs, but only under the conditions described in the
GNU Emacs General Public License.   A copy of this license is
supposed to have been given to you along with GNU Emacs so you
can know your rights and responsibilities.  It should be in a
file named COPYING.  Among other things, the copyright notice
and this notice must be preserved on all copies.  */



/* Include here a s- file that describes the system type you are using.
   See the file ../etc/MACHINES for a list of systems and
   the names of the s- files to use for them.
   See s-template.h for documentation on writing s- files.  */
#include "s-usg5-3.h"

/* Include here a m- file that describes the machine and system you use.
   See the file ../etc/MACHINES for a list of machines and
   the names of the m- files to use for them.
   See m-template.h for info on what m- files should define.
   */
#include "m-bat.h"

/* Load in the conversion definitions if this system
   needs them and the source file being compiled has not
   said to inhibit this.  There should be no need for you
   to alter these lines.  */

#ifdef SHORTNAMES
#ifndef NO_SHORTNAMES
#include "../shortnames/remap.h"
#endif /* not NO_SHORTNAMES */
#endif /* SHORTNAMES */

/* Define HAVE_X_WINDOWS if you want to use the X window system.  */

/* #define HAVE_X_WINDOWS */

/* Define X11 if you want to use version 11 of X windows.
   Otherwise, Emacs expects to use version 10.  */

/* #define X11 */

/* Define HAVE_X_MENU if you want to use the X window menu system.
   This appears to work on some machines that support X
   and not on others.  */

/* #define HAVE_X_MENU */

/* Define `subprocesses' should be defined if you want to
   have code for asynchronous subprocesses
   (as used in M-x compile and M-x shell).
   These do not work for some USG systems yet;
   for the ones where they work, the s-*.h file defines this flag.  */

#ifndef VMS
#ifndef USG
#define subprocesses
#endif
#endif

/* Define USER_FULL_NAME to return a string
   that is the user's full name.
   It can assume that the variable `pw'
   points to the password file entry for this user.

   At some sites, the pw_gecos field contains
   the user's full name.  If neither this nor any other
   field contains the right thing, use pw_name,
   giving the user's login name, since that is better than nothing.  */

#define USER_FULL_NAME pw->pw_gecos

/* Define AMPERSAND_FULL_NAME if you use the convention
   that & in the full name stands for the login id.  */

/* #define AMPERSAND_FULL_NAME */

/* Maximum screen width we handle. */

#define MScreenWidth 300

/* Maximum screen length we handle. */

#define MScreenLength 300

/* # bytes of pure Lisp code to leave space for.
   Note that s-vms.h and m-sun2.h may override this default.  */

#ifndef PURESIZE
#ifdef HAVE_X_WINDOWS
#define PURESIZE 122000
#else
#define PURESIZE 140000
#endif
#endif

/* Define HIGHPRI as a negative number
   if you want Emacs to run at a higher than normal priority.
   For this to take effect, you must install Emacs with setuid root.
   Emacs will change back to the users's own uid after setting
   its priority.  */

/* #define HIGHPRI */

---- clip ---- clip ---- clip ----

contents of the m-bat.h - file:
---- clip ---- clip ---- clip ----

/* m- file for the Motorola delta running System V.3.
   tested on sys1147 (mvme147 - based system).
   Copyright (C) 1986 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY.  No author or distributor
accepts responsibility to anyone for the consequences of using it
or for whether it serves any particular purpose or works at all,
unless he says so in writing.  Refer to the GNU Emacs General Public
License for full details.

Everyone is granted permission to copy, modify and redistribute
GNU Emacs, but only under the conditions described in the
GNU Emacs General Public License.   A copy of this license is
supposed to have been given to you along with GNU Emacs so you
can know your rights and responsibilities.  It should be in a
file named COPYING.  Among other things, the copyright notice
and this notice must be preserved on all copies.  */


/* The following three symbols give information on
 the size of various data types.  */

#define SHORTBITS 16		/* Number of bits in a short */

#define INTBITS 32		/* Number of bits in an int */

#define LONGBITS 32		/* Number of bits in a long */

/* Define BIG_ENDIAN iff lowest-numbered byte in a word
   is the most significant byte.  */

#define BIG_ENDIAN

/* Define NO_ARG_ARRAY if you cannot take the address of the first of a
 * group of arguments and treat it as an array of the arguments.  */

/* #define NO_ARG_ARRAY */

/* Define WORD_MACHINE if addresses and such have
 * to be corrected before they can be used as byte counts.  */

/* #define WORD_MACHINE */

/* Define how to take a char and sign-extend into an int.
   On machines where char is signed, this is a no-op.  */

#define SIGN_EXTEND_CHAR(c) (c)

/* Now define a symbol for the cpu type, if your compiler
   does not define it automatically:
   vax, m68000, ns16000, pyramid, orion, tahoe and APOLLO
   are the ones defined so far.  */
#define m68000
#define NO_REMAP

#define HAVE_SYSVIPC

/* Use type int rather than a union, to represent Lisp_Object */
/* This is desirable for most machines.  */

#define NO_UNION_TYPE 
#define SWITCH_ENUM_BUG
/* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend
   the 24-bit bit field into an int.  In other words, if bit fields
   are always unsigned.

   If you use NO_UNION_TYPE, this flag does not matter.  */

#define EXPLICIT_SIGN_EXTEND

/* Data type of load average, as read out of kmem.  */

/* #define LOAD_AVE_TYPE long */

/* Convert that into an integer that is 100 for a load average of 1.0  */

/* #define LOAD_AVE_CVT(x) (int) (((double) (x)) * 100.0 / FSCALE) */

/* Define CANNOT_DUMP on machines where unexec does not work.
   Then the function dump-emacs will not be defined
   and temacs will do (load "loadup") automatically unless told otherwise.  */

/* #define CANNOT_DUMP */

/* Define VIRT_ADDR_VARIES if the virtual addresses of
   pure and impure space as loaded can vary, and even their
   relative order cannot be relied on.

   Otherwise Emacs assumes that data space precedes text space,
   numerically.  */

/* #define VIRT_ADDR_VARIES */

/* Define C_ALLOCA if this machine does not support a true alloca
   and the one written in C should be used instead.
   Define HAVE_ALLOCA to say that the system provides a properly
   working alloca function and it should be used.
   Define neither one if an assembler-language alloca
   in the file alloca.s should be used.  */

#define C_ALLOCA
#define STACK_DIRECTION (-1)
/* uncomment the following line if You added alloca.o into the /lib/libc.a */
/*#define HAVE_ALLOCA*/
#if 0
#ifdef __GNUC__
#define alloca __builtin_alloca
#endif
#endif
/* uncomment the following line if You use alloca.s (compiler braindamaged). */
/*#define BAT_ALLOCA*/
   				   

/* Change some things to avoid bugs in compiler */

/* The standard C library is -lcieee, not -lc.
   Also use the PW library, which contains alloca.
   DO NOT USE -lPW. That version of alloca is broken, at last until version
   SVR3V5.1 . -riku@field.fi */

#define LIB_STANDARD -lc

#define LIBS_TERMCAP -lcurses

/* crt0.c should use the vax-bsd style of entry, with no dummy args.  */


/* emacs's magic number isn't temacs's;
   temacs is writeable text (the default!).  */

---- clip ---- clip ---- clip ----

-- 
Riku "the bit" Kalinen                               E-Mail : riku@field.FI
FAE/Systems, Field Oy.                               Telex  : 122022 field sf
                                                     Phone  : +358 0 757 1011
"Welcome to the party, pal!" (From movie Die Hard)   G3 Fax : +358 0 798 853