Article View: gnu.epoch.misc
Article #1975copy and paste problem between epoch & xwindows
From: Amir J. Katz (Xpert)
Date: Mon, 20 May 1991 07:23
Date: Mon, 20 May 1991 07:23
19 lines
1411 bytes
1411 bytes
Following a discussion on the newsgroup, there is a workaround:
- Before cutting something from an Epoch window, go to an xterm window
and then select (e.g. cut) a single space:
point at a space, press left button, keep pressed, move mouse to the right
so that the space is in rev. video.
- This apparently clears the previous selection.
- From this point on, you can cut something from Epoch and paste it into an xterm window.
- Cutting again in an non-Epoch window will require repeating the procdure.
- This may work with non-xterm windows, but I have not checked it.
--
Amir J. Katz, System Manager
Internet: amir%pilat.UUCP@taux01.nsc.com
UUCP: {decwrl,uunet,...}!nsc!taux01!amir
Phone: +972 52-570713
Fax: +972 52-570719
Snail-mail: Amir J. Katz, Silvaco Israel Ltd.
19 Maskit St., Herzelia, Israel 46733
Technical Details
Message-ID:
<AMIR.91May20102318@taux01.nsc.com>Path:
arc1-ca.pugleaf.net!gmdzi!unido!mcsun!uunet!elroy.jpl.nasa.gov!ames!amdahl!nsc!taux01!pilat!amirShow Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: fc7ee,958956f75932ab57 X-Google-Attributes: gidfc7ee,public X-Google-ArrivalTime: 1991-05-20 23:18:13 PST Path: arc1-ca.pugleaf.net!gmdzi!unido!mcsun!uunet!elroy.jpl.nasa.gov!ames!amdahl!nsc!taux01!pilat!amir From: amir@taux01.nsc.com (Amir J. Katz (Xpert)) Newsgroups: gnu.epoch.misc Subject: copy and paste problem between epoch & xwindows Message-ID: <AMIR.91May20102318@taux01.nsc.com> Date: 20 May 91 07:23:18 GMT Sender: amir@pilat.Silvaco.Com Distribution: gnu Organization: Silvaco Israel Ltd. Lines: 19