Thread View: gnu.g++.lib.bug
1 messages
1 total messages
Started by Dan Vallone x4455
Tue, 05 Jan 1993 18:14
Re: SCO 386 Build of libg++-2.3
Author: Dan Vallone x4455
Date: Tue, 05 Jan 1993 18:14
Date: Tue, 05 Jan 1993 18:14
35 lines
2102 bytes
2102 bytes
J. Steven Harrison writes: > I am trying to build libg++-2.3 on a Intel 486 box running SCO UNIX 3.2v4 > This is config.status > -------------------------------------------------- > #!/bin/sh > # This file was generated automatically by configure. Do not edit. > # This directory was configured as follows: > ./configure i386-sco3.2v4 --prefix=/usr/local -norecursion > # using "config/mh-sco" > -------------------------------------------------- I had very little problems building libg++-2.3 under SCO's ODT 1.1 op. system. About all I did was to add .NOEXPORT: to a few Makefiles. I also had to add some floating point defs to the file floatconv.C I used gcc-2.3.3 which also built extremely easily. Let me know if you need diffs for the 3 or 4 files I had to alter. -Dan -- +----------------------------------------------------------------------+ | Daniel E. Vallone | | Arinc Research Inc uunet!srg!dvallone | | SR, Mail Stop 5-230 dvallone%srg@uunet.uu.net | | 2551 Riva Road | | Annapolis, MD 21401 fax: 410-266-4419 voice: 410-266-4455 | +----------------------------------------------------------------------+ -- +----------------------------------------------------------------------+ | Daniel E. Vallone | | Arinc Research Inc uunet!srg!dvallone | | SR, Mail Stop 5-230 dvallone%srg@uunet.uu.net |
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads