Thread View: gnu.g++
3 messages
3 total messages
Started by Qun Lou
Wed, 30 Dec 1992 04:18
Installing gcc 2.3.3 and libg++ 2.3 on HP 9000/835, a success
Author: Qun Lou
Date: Wed, 30 Dec 1992 04:18
Date: Wed, 30 Dec 1992 04:18
37 lines
1451 bytes
1451 bytes
Hi, again.
I finally installed gcc 2.3.3 and libg++ 2.3 successfully
under HP 835 running hp-ux.
The problems I mentioned in my previous email disappeared.
The Dec-27 release of gcc 2.3.3 works great and seems to have included
all the bug fixes in jaguar.cs.utah version.
I wish to share the experience with other people who
would be installing gcc or libg++ on HP or other computers.
1. Before installing gcc 2.3.3, I deleted all the previous gcc stuff in
/usr/local/lib/gcc-lib and in /usr/local/bin.
2. Necessary files for successful installation:
bison in /usr/local/bin
gas as emphasized in gcc 2.3.3 README, gas should be installed *before*
installing gcc as '/usr/local/lib/gcc-lib/hp835-hpux/2.3.3/as'
3. Configuration usage (same for gcc 2.3.3 and libg++-2.3):
./configure hp835-hpux --gas --with-gnu-as
/*
* do stage1 and stage2 compiling as stated in INSTALL file
* and finally must do
*/
make compare
Cheers,
Qun Lou
Dept of Computer Science
Texas A&M University
louqun@cs.tamu.edu
Re: Installing gcc 2.3.3 and libg++ 2.3
Author: Tim Werner
Date: Wed, 06 Jan 1993 12:00
Date: Wed, 06 Jan 1993 12:00
41 lines
2106 bytes
2106 bytes
In a previous article, louqun@cs.tamu.edu (Qun Lou) says: >I finally installed gcc 2.3.3 and libg++ 2.3 successfully >The problems I mentioned in my previous email disappeared. > >I wish to share the experience with other people who >would be installing gcc or libg++ on HP or other computers. > >1. Before installing gcc 2.3.3, I deleted all the previous gcc stuff in >/usr/local/lib/gcc-lib and in /usr/local/bin. > >2. Necessary files for successful installation: > >bison in /usr/local/bin >gas as emphasized in gcc 2.3.3 README, gas should be installed *before* > installing gcc as '/usr/local/lib/gcc-lib/hp835-hpux/2.3.3/as' I am trying to build libg++ on a sun3 running SunOS, and getting the following: rootme=`pwd`/ ; export rootme; CC="cc "; export CC; CXX="gcc "; export CXX; CON FIG_NM="nm"; export CONFIG_NM; ./utils/gen-params LIB_VERSION=2.3 >tmp-params.h nm: dummy.o: cannot open nm: dummy.o: cannot open nm failed to find FUNC in dummy.o! ./utils/gen-params: -1: bad number make[1]: *** [_G_config.h] Error 1 make: *** [all-libg++] Error 1 I am trying to build these libs in a non-standard path. Although I set 'prefix' to the path for gcc (also non-standard), make isn't finding it, as you can see from the above (CC="cc "; export CC; CXX="gcc "). Has anyone else had and solved this problem? Is bison and gas really the key? Everything has to be built in a non-standard path. I can't get the sys-admin to help with installation until everything is working. thanks tim werner@sparcserver.mc.ab.com --
Re: Installing gcc 2.3.3 and libg++ 2.3
Author: Stephen C. Fitch
Date: Wed, 06 Jan 1993 14:32
Date: Wed, 06 Jan 1993 14:32
72 lines
3279 bytes
3279 bytes
In a previous article, br762@cleveland.Freenet.Edu (Tim Werner) says: > >In a previous article, louqun@cs.tamu.edu (Qun Lou) says: > >>I finally installed gcc 2.3.3 and libg++ 2.3 successfully >>The problems I mentioned in my previous email disappeared. >> >>I wish to share the experience with other people who >>would be installing gcc or libg++ on HP or other computers. >> >>1. Before installing gcc 2.3.3, I deleted all the previous gcc stuff in >>/usr/local/lib/gcc-lib and in /usr/local/bin. >> >>2. Necessary files for successful installation: >> >>bison in /usr/local/bin >>gas as emphasized in gcc 2.3.3 README, gas should be installed *before* >> installing gcc as '/usr/local/lib/gcc-lib/hp835-hpux/2.3.3/as' > >I am trying to build libg++ on a sun3 running SunOS, and getting the following: >rootme=`pwd`/ ; export rootme; CC="cc "; export CC; CXX="gcc "; export CXX; CON >FIG_NM="nm"; export CONFIG_NM; ./utils/gen-params LIB_VERSION=2.3 >tmp-params.h >nm: dummy.o: cannot open >nm: dummy.o: cannot open >nm failed to find FUNC in dummy.o! >./utils/gen-params: -1: bad number >make[1]: *** [_G_config.h] Error 1 >make: *** [all-libg++] Error 1 > >I am trying to build these libs in a non-standard path. Although I set 'prefix' >to the path for gcc (also non-standard), make isn't finding it, as you can see >from the above (CC="cc "; export CC; CXX="gcc "). > >Has anyone else had and solved this problem? Is bison and gas really the key? > >Everything has to be built in a non-standard path. I can't get the sys-admin >to help with installation until everything is working. > >thanks >tim >werner@sparcserver.mc.ab.com >-- > I'm also experiencing the same problems under SunOS 4.1.3 on a SparcStation 1. I have to maintain my original GCC 1.37 environment so I wish to build/test/ and release ( to a a select few at the start) GCC 2.3.2 and libg++2.3. I have attempted to build under: /usr/local/tmp I have: bin bison-1.19 lib binutils-2.0 gcc-2.3.2 libg++-2.3 binutils-2.0.tar.Z include libg++-2.3.tar.Z binutils-2.0_OU info man After having run configure sun4 -prefix=/usr/local/tmp and make I see error messages as reported by the other poster. Do I need Gas, nm, ld and the binutils ? What sort of directory structure should I use to compile libg++2.3. How can I get the libg++2.3 gen use my new GCC 2.3.2 compiler ( to be found below /usr/local/tmp/bin ). Lots of questions, not a lot of answers... If anyone reports a fix to this problem, let me know, thanks. Steve.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads